Initial Configuration Push

deps/RPi.GPIO-0.6.2.dist-info/DESCRIPTION.rst

@@ -0,0 +1,204 @@
+This package provides a class to control the GPIO on a Raspberry Pi.
+
+Note that this module is unsuitable for real-time or timing critical applications.  This is because you
+can not predict when Python will be busy garbage collecting.  It also runs under the Linux kernel which
+is not suitable for real time applications - it is multitasking O/S and another process may be given
+priority over the CPU, causing jitter in your program.  If you are after true real-time performance and
+predictability, buy yourself an Arduino http://www.arduino.cc !
+
+Note that the current release does not support SPI, I2C, hardware PWM or serial functionality on the RPi yet.
+This is planned for the near future - watch this space!  One-wire functionality is also planned.
+
+Although hardware PWM is not available yet, software PWM is available to use on all channels.
+
+For examples and documentation, visit http://sourceforge.net/p/raspberry-gpio-python/wiki/Home/
+
+Change Log
+==========
+
+0.6.2
+-----
+- Rewrote Debian packaging mechanism
+- RPI_INFO reports Pi 3
+- Changed module layout - moved C components to RPi._GPIO
+
+0.6.1
+-----
+- Update RPI_INFO to detect more board types
+- Issue 118 - add_event_detect sometimes gives runtime error with unpriv user 
+- Issue 120 - setmode() remembers invalid mode
+
+0.6.0a3
+-------
+- Now uses /dev/gpiomem if available to avoid being run as root
+- Fix warnings with pull up/down on pins 3/5
+- Correct base address on Pi 2 when devicetree is disabled
+- caddr_t error on compile (Issue 109)
+- Error on invalid parameters to setup() (issue 93)
+- Add timeout parameter to wait_for_edge() (issue 91)
+
+0.5.11
+------
+- Fix - pins > 26 missing when using BOARD mode
+- Add getmode()
+- Raise exception when a mix of modes is used
+- GPIO.cleanaup() unsets the current pin mode
+
+0.5.10
+------
+- Issue 95 - support RPi 2 boards
+- Introduce RPI_INFO
+- Deprecate RPI_REVISION
+- Issue 97 - fixed docstring for setup()
+
+0.5.9
+-----
+- Issue 87 - warn about pull up/down on i2c pins
+- Issue 86/75 - wait_for_edge() bugfix
+- Issue 84 - recognise RPi properly when using a custom kernel
+- Issue 90 - cleanup() on a list/tuple of channels
+
+0.5.8
+-----
+- Allow lists/tuples of channels in GPIO.setup()
+- GPIO.output() now allows lists/tuples of values
+- GPIO.wait_for_edge() bug fixes (issue 78)
+
+0.5.7
+-----
+- Issue 67 - speed up repeated calls to GPIO.wait_for_event()
+- Added bouncetime keyword to GPIO.wait_for_event()
+- Added extra edge/interrupt unit tests
+- GPIO.wait_for_event() can now be mixed with GPIO.add_event_detect()
+- Improved cleanups of events
+- Issue 69 resolved
+
+0.5.6
+-----
+- Issue 68 - support for RPi Model B+
+- Fix gpio_function()
+
+0.5.5
+-----
+- Issue 52 - 'unallocate' a channel
+- Issue 35 - use switchbounce with GPIO.event_detected()
+- Refactored events code
+- Rewrote tests to use unittest mechanism and new test board with loopbacks
+- Fixed adding events after a GPIO.cleanup()
+- Issue 64 - misleading /dev/mem permissions error
+- Issue 59 - name collision with PWM constant and class
+
+0.5.4
+-----
+- Changed release status (from alpha to full release)
+- Warn when GPIO.cleanup() used with nothing to clean up (issue 44)
+- Avoid collisions in constants (e.g. HIGH / RISING / PUD_DOWN)
+- Accept BOARD numbers in gpio_function (issue 34)
+- More return values for gpio_function (INPUT, OUTPUT, SPI, I2C, PWM, SERIAL, UNKNOWN)
+- Tidy up docstrings
+- Fix /dev/mem access error with gpio_function
+
+0.5.3a
+------
+- Allow pydoc for non-root users (issue 27)
+- Fix add_event_detect error when run as daemon (issue 32)
+- Simplified exception types
+- Changed from distribute to pip
+
+0.5.2a
+------
+- Added software PWM (experimental)
+- Added switch bounce handling to event callbacks
+- Added channel number parameter to event callbacks (issue 31)
+- Internal refactoring and code tidy up
+
+0.5.1a
+------
+- Fixed callbacks for multiple GPIOs (issue 28)
+
+0.5.0a
+------
+- Added new edge detection events (interrupt handling)
+  - Added add_event_detect()
+  - Added remove_event_detect()
+  - Added add_event_callback()
+  - Added wait_for_edge()
+- Removed old experimental event functions
+  - Removed set_rising_event()
+  - Removed set_falling_event()
+  - Removed set_high_event()
+  - Removed set_low_event()
+- Changed event_detected() for new edge detection functionality
+- input() now returns 0/LOW == False or 1/HIGH == True (integers) instead of False or True (booleans).
+- Fix error on repeated import (issue 3)
+- Change SetupException to a RuntimeError so it can be caught on import (issue 25, Chris Hager <chris@linuxuser.at>)
+- Improved docstrings of functions
+
+0.4.2a
+------
+- Fix for installing on Arch Linux (Python 3.3) (issue 20)
+- Initial value when setting a channel as an output (issue 19)
+
+0.4.1a
+------
+- Added VERSION
+- Permit input() of channels set as outputs (Eric Ptak <trouch@trouch.com>)
+
+0.4.0a
+------
+- Added support for Revision 2 boards
+- Added RPI_REVISION
+- Added cleanup() function and removed automatic reset functionality on program exit
+- Added get_function() to read existing GPIO channel functionality (suggestion from Eric Ptak <trouch@trouch.com>)
+- Added set_rising_event()
+- Added set_falling_event()
+- Added set_high_event()
+- Added set_low_event()
+- Added event_detected()
+- Added test/test.py
+- Converted debian to armhf
+- Fixed C function short_wait() (thanks to Thibault Porteboeuf <thibaultporteboeuf@gmail.com>)
+
+0.3.1a
+------
+- Fixed critical bug with swapped high/low state on outputs
+- Added pull-up / pull-down setup functionality for inputs
+
+0.3.0a
+------
+- Rewritten as a C extension
+- Now uses /dev/mem and SoC registers instead of /sys/class/gpio
+- Faster!
+- Make call to GPIO.setmode() mandatory
+- Added GPIO.HIGH and GPIO.LOW constants
+
+0.2.0
+-----
+- Changed status from alpha to beta
+- Added setmode() to be able to use BCM GPIO 00.nn channel numbers
+- Renamed InvalidPinException to InvalidChannelException
+
+0.1.0
+------
+- Fixed direction bug
+- Added MANIFEST.in (to include missing file)
+- Changed GPIO channel number to pin number
+- Tested and working!
+
+0.0.3a
+------
+- Added GPIO table
+- Refactored
+- Fixed a few critical bugs
+- Still completely untested!
+
+0.0.2a
+------
+- Internal refactoring.  Still completely untested!
+
+0.0.1a
+------
+- First version.  Completely untested until I can get hold of a Raspberry Pi!
+
+
+

deps/RPi.GPIO-0.6.2.dist-info/INSTALLER

@@ -0,0 +1 @@
+pip

deps/RPi.GPIO-0.6.2.dist-info/METADATA

@@ -0,0 +1,224 @@
+Metadata-Version: 2.0
+Name: RPi.GPIO
+Version: 0.6.2
+Summary: A module to control Raspberry Pi GPIO channels
+Home-page: http://sourceforge.net/projects/raspberry-gpio-python/
+Author: Ben Croston
+Author-email: ben@croston.org
+License: MIT
+Keywords: Raspberry Pi GPIO
+Platform: UNKNOWN
+Classifier: Development Status :: 5 - Production/Stable
+Classifier: Operating System :: POSIX :: Linux
+Classifier: License :: OSI Approved :: MIT License
+Classifier: Intended Audience :: Developers
+Classifier: Programming Language :: Python :: 2.7
+Classifier: Programming Language :: Python :: 3
+Classifier: Topic :: Software Development
+Classifier: Topic :: Home Automation
+Classifier: Topic :: System :: Hardware
+
+This package provides a class to control the GPIO on a Raspberry Pi.
+
+Note that this module is unsuitable for real-time or timing critical applications.  This is because you
+can not predict when Python will be busy garbage collecting.  It also runs under the Linux kernel which
+is not suitable for real time applications - it is multitasking O/S and another process may be given
+priority over the CPU, causing jitter in your program.  If you are after true real-time performance and
+predictability, buy yourself an Arduino http://www.arduino.cc !
+
+Note that the current release does not support SPI, I2C, hardware PWM or serial functionality on the RPi yet.
+This is planned for the near future - watch this space!  One-wire functionality is also planned.
+
+Although hardware PWM is not available yet, software PWM is available to use on all channels.
+
+For examples and documentation, visit http://sourceforge.net/p/raspberry-gpio-python/wiki/Home/
+
+Change Log
+==========
+
+0.6.2
+-----
+- Rewrote Debian packaging mechanism
+- RPI_INFO reports Pi 3
+- Changed module layout - moved C components to RPi._GPIO
+
+0.6.1
+-----
+- Update RPI_INFO to detect more board types
+- Issue 118 - add_event_detect sometimes gives runtime error with unpriv user 
+- Issue 120 - setmode() remembers invalid mode
+
+0.6.0a3
+-------
+- Now uses /dev/gpiomem if available to avoid being run as root
+- Fix warnings with pull up/down on pins 3/5
+- Correct base address on Pi 2 when devicetree is disabled
+- caddr_t error on compile (Issue 109)
+- Error on invalid parameters to setup() (issue 93)
+- Add timeout parameter to wait_for_edge() (issue 91)
+
+0.5.11
+------
+- Fix - pins > 26 missing when using BOARD mode
+- Add getmode()
+- Raise exception when a mix of modes is used
+- GPIO.cleanaup() unsets the current pin mode
+
+0.5.10
+------
+- Issue 95 - support RPi 2 boards
+- Introduce RPI_INFO
+- Deprecate RPI_REVISION
+- Issue 97 - fixed docstring for setup()
+
+0.5.9
+-----
+- Issue 87 - warn about pull up/down on i2c pins
+- Issue 86/75 - wait_for_edge() bugfix
+- Issue 84 - recognise RPi properly when using a custom kernel
+- Issue 90 - cleanup() on a list/tuple of channels
+
+0.5.8
+-----
+- Allow lists/tuples of channels in GPIO.setup()
+- GPIO.output() now allows lists/tuples of values
+- GPIO.wait_for_edge() bug fixes (issue 78)
+
+0.5.7
+-----
+- Issue 67 - speed up repeated calls to GPIO.wait_for_event()
+- Added bouncetime keyword to GPIO.wait_for_event()
+- Added extra edge/interrupt unit tests
+- GPIO.wait_for_event() can now be mixed with GPIO.add_event_detect()
+- Improved cleanups of events
+- Issue 69 resolved
+
+0.5.6
+-----
+- Issue 68 - support for RPi Model B+
+- Fix gpio_function()
+
+0.5.5
+-----
+- Issue 52 - 'unallocate' a channel
+- Issue 35 - use switchbounce with GPIO.event_detected()
+- Refactored events code
+- Rewrote tests to use unittest mechanism and new test board with loopbacks
+- Fixed adding events after a GPIO.cleanup()
+- Issue 64 - misleading /dev/mem permissions error
+- Issue 59 - name collision with PWM constant and class
+
+0.5.4
+-----
+- Changed release status (from alpha to full release)
+- Warn when GPIO.cleanup() used with nothing to clean up (issue 44)
+- Avoid collisions in constants (e.g. HIGH / RISING / PUD_DOWN)
+- Accept BOARD numbers in gpio_function (issue 34)
+- More return values for gpio_function (INPUT, OUTPUT, SPI, I2C, PWM, SERIAL, UNKNOWN)
+- Tidy up docstrings
+- Fix /dev/mem access error with gpio_function
+
+0.5.3a
+------
+- Allow pydoc for non-root users (issue 27)
+- Fix add_event_detect error when run as daemon (issue 32)
+- Simplified exception types
+- Changed from distribute to pip
+
+0.5.2a
+------
+- Added software PWM (experimental)
+- Added switch bounce handling to event callbacks
+- Added channel number parameter to event callbacks (issue 31)
+- Internal refactoring and code tidy up
+
+0.5.1a
+------
+- Fixed callbacks for multiple GPIOs (issue 28)
+
+0.5.0a
+------
+- Added new edge detection events (interrupt handling)
+  - Added add_event_detect()
+  - Added remove_event_detect()
+  - Added add_event_callback()
+  - Added wait_for_edge()
+- Removed old experimental event functions
+  - Removed set_rising_event()
+  - Removed set_falling_event()
+  - Removed set_high_event()
+  - Removed set_low_event()
+- Changed event_detected() for new edge detection functionality
+- input() now returns 0/LOW == False or 1/HIGH == True (integers) instead of False or True (booleans).
+- Fix error on repeated import (issue 3)
+- Change SetupException to a RuntimeError so it can be caught on import (issue 25, Chris Hager <chris@linuxuser.at>)
+- Improved docstrings of functions
+
+0.4.2a
+------
+- Fix for installing on Arch Linux (Python 3.3) (issue 20)
+- Initial value when setting a channel as an output (issue 19)
+
+0.4.1a
+------
+- Added VERSION
+- Permit input() of channels set as outputs (Eric Ptak <trouch@trouch.com>)
+
+0.4.0a
+------
+- Added support for Revision 2 boards
+- Added RPI_REVISION
+- Added cleanup() function and removed automatic reset functionality on program exit
+- Added get_function() to read existing GPIO channel functionality (suggestion from Eric Ptak <trouch@trouch.com>)
+- Added set_rising_event()
+- Added set_falling_event()
+- Added set_high_event()
+- Added set_low_event()
+- Added event_detected()
+- Added test/test.py
+- Converted debian to armhf
+- Fixed C function short_wait() (thanks to Thibault Porteboeuf <thibaultporteboeuf@gmail.com>)
+
+0.3.1a
+------
+- Fixed critical bug with swapped high/low state on outputs
+- Added pull-up / pull-down setup functionality for inputs
+
+0.3.0a
+------
+- Rewritten as a C extension
+- Now uses /dev/mem and SoC registers instead of /sys/class/gpio
+- Faster!
+- Make call to GPIO.setmode() mandatory
+- Added GPIO.HIGH and GPIO.LOW constants
+
+0.2.0
+-----
+- Changed status from alpha to beta
+- Added setmode() to be able to use BCM GPIO 00.nn channel numbers
+- Renamed InvalidPinException to InvalidChannelException
+
+0.1.0
+------
+- Fixed direction bug
+- Added MANIFEST.in (to include missing file)
+- Changed GPIO channel number to pin number
+- Tested and working!
+
+0.0.3a
+------
+- Added GPIO table
+- Refactored
+- Fixed a few critical bugs
+- Still completely untested!
+
+0.0.2a
+------
+- Internal refactoring.  Still completely untested!
+
+0.0.1a
+------
+- First version.  Completely untested until I can get hold of a Raspberry Pi!
+
+
+

deps/RPi.GPIO-0.6.2.dist-info/RECORD

@@ -0,0 +1,12 @@
+RPi/_GPIO.cpython-34m.so,sha256=vAgqvC2ElrF2cSyFgxJ_SvDLSJ6m5h6R77GxoBQ9nDg,132144
+RPi/__init__.py,sha256=47DEQpj8HBSa-_TImW-5JCeuQeRkm5NMpJWZG3hSuFU,0
+RPi/GPIO/__init__.py,sha256=jnxwfrIfmsuc4CHYCyD7fhmXuK910T8nJZly3TFbZ1s,1112
+RPi.GPIO-0.6.2.dist-info/DESCRIPTION.rst,sha256=XQZ6vEQCpIDCQyetosBFH2erMMSGGq-K6mG1Lw99Yrw,6289
+RPi.GPIO-0.6.2.dist-info/METADATA,sha256=_m7PpAOt0icvoUp0OCBMJRRu-HCWgyoWnSg-4Bnn9Jg,6988
+RPi.GPIO-0.6.2.dist-info/RECORD,,
+RPi.GPIO-0.6.2.dist-info/WHEEL,sha256=qlXKyUxaKdKGVZKHdQaMFOPNWg5qC8OVyb-aicJwJ6U,104
+RPi.GPIO-0.6.2.dist-info/metadata.json,sha256=tQq4Ev0lJJDCwtSI_mlRDqSWLcCT9vEVAO9VKv7fg8Y,834
+RPi.GPIO-0.6.2.dist-info/top_level.txt,sha256=D2ebmx5QNuKCb-J2LbVMXkkhIVNpXvmxlOVIZjPsALw,4
+RPi.GPIO-0.6.2.dist-info/INSTALLER,sha256=zuuue4knoyJ-UwPPXg8fezS7VCrXJQrAP7zeNuwvFQg,4
+RPi/GPIO/__pycache__/__init__.cpython-34.pyc,,
+RPi/__pycache__/__init__.cpython-34.pyc,,

deps/RPi.GPIO-0.6.2.dist-info/WHEEL

@@ -0,0 +1,5 @@
+Wheel-Version: 1.0
+Generator: bdist_wheel (0.29.0)
+Root-Is-Purelib: false
+Tag: cp34-cp34m-linux_armv7l
+

deps/RPi.GPIO-0.6.2.dist-info/metadata.json

@@ -0,0 +1 @@
+{"classifiers": ["Development Status :: 5 - Production/Stable", "Operating System :: POSIX :: Linux", "License :: OSI Approved :: MIT License", "Intended Audience :: Developers", "Programming Language :: Python :: 2.7", "Programming Language :: Python :: 3", "Topic :: Software Development", "Topic :: Home Automation", "Topic :: System :: Hardware"], "extensions": {"python.details": {"contacts": [{"email": "ben@croston.org", "name": "Ben Croston", "role": "author"}], "document_names": {"description": "DESCRIPTION.rst"}, "project_urls": {"Home": "http://sourceforge.net/projects/raspberry-gpio-python/"}}}, "generator": "bdist_wheel (0.29.0)", "keywords": ["Raspberry", "Pi", "GPIO"], "license": "MIT", "metadata_version": "2.0", "name": "RPi.GPIO", "summary": "A module to control Raspberry Pi GPIO channels", "version": "0.6.2"}

deps/RPi.GPIO-0.6.2.dist-info/top_level.txt

@@ -0,0 +1 @@
+RPi