Initial Configuration Push

2025-11-06 17:51:36 +00:00 · 2016-10-11 16:42:06 +00:00
parent b83eeadfcb
commit 5127bc2109
2145 changed files with 298464 additions and 0 deletions
--- a/deps/rpi_rf-0.9.5.dist-info/METADATA
+++ b/deps/rpi_rf-0.9.5.dist-info/METADATA
@@ -0,0 +1,127 @@
+Metadata-Version: 2.0
+Name: rpi-rf
+Version: 0.9.5
+Summary: Sending and receiving 433MHz signals with cheap GPIO RF modules on a Raspberry Pi
+Home-page: https://github.com/milaq/rpi-rf
+Author: Micha LaQua
+Author-email: micha.laqua@gmail.com
+License: BSD
+Keywords: rpi,raspberry,raspberry pi,rf,gpio,radio,433,433mhz
+Platform: UNKNOWN
+Classifier: Development Status :: 4 - Beta
+Classifier: Intended Audience :: Developers
+Classifier: Topic :: Software Development :: Build Tools
+Classifier: License :: OSI Approved :: BSD License
+Classifier: Programming Language :: Python :: 3
+Classifier: Operating System :: POSIX :: Linux
+Classifier: Topic :: Software Development :: Libraries :: Python Modules
+Requires-Dist: RPi.GPIO
+
+rpi-rf
+======
+
+Introduction
+------------
+
+Python module for sending and receiving 433MHz LPD/SRD signals with generic low-cost GPIO RF modules on a Raspberry Pi.
+
+Protocol and base logic ported ported from `rc-switch`_.
+
+Supported hardware
+------------------
+
+All generic 433MHz capable modules (cost: ~2€) connected via GPIO to a Raspberry Pi.
+
+.. figure:: http://i.imgur.com/vG89UP9.jpg
+   :alt: 433modules
+
+Compatibility
+-------------
+
+Generic RF outlets and most 433MHz switches (cost: ~15€/3pcs).
+
+.. figure:: http://i.imgur.com/WVRxvWe.jpg
+   :alt: rfoutlet
+
+Full list compatible devices and chips see the `rc-switch Wiki`_
+
+Dependencies
+------------
+
+::
+
+    RPi.GPIO
+
+Installation
+------------
+
+On your Raspberry Pi, install the *rpi_rf* module via pip.
+
+Python 3::
+
+    # apt-get install python3-pip
+    # pip3 install rpi-rf
+
+Wiring diagram (example)
+------------------------
+
+Raspberry Pi 1/2(B+)::
+
+                       RPI GPIO HEADER
+                  ____________
+                 |        ____|__
+                 |       |    |  |
+                 |     01|  . x  |02
+                 |       |  . x__|________       RX
+                 |       |  . x__|______  |   ________
+                 |       |  . .  |      | |  |        |
+       TX        |   ____|__x .  |      | |__|VCC     |
+     _______     |  |  __|__x .  |      |    |        |
+    |       |    |  | |  |  x____|______|____|DATA    |
+    |    GND|____|__| |  |  . .  |      |    |        |
+    |       |    |    |  |  . .  |      |    |DATA    |
+    |    VCC|____|    |  |  . .  |      |    |        |
+    |       |         |  |  . .  |      |____|GND     |
+    |   DATA|_________|  |  . .  |           |________|
+    |_______|            |  . .  |
+                         |  . .  |
+                         |  . .  |
+                         |  . .  |
+                         |  . .  |
+                         |  . .  |
+                         |  . .  |
+                       39|  . .  |40
+                         |_______|
+
+    TX:
+       GND > PIN 09 (GND)
+       VCC > PIN 02 (5V)
+      DATA > PIN 11 (GPIO17)
+
+    RX:
+       VCC > PIN 04 (5V)
+      DATA > PIN 13 (GPIO27)
+      GND > PIN 06 (GND)
+
+Usage
+-----
+
+See `examples`_ (`send.py`_, `receive.py`_).
+
+Open Source
+-----------
+
+* The code is licensed under the `BSD Licence`_
+* The project source code is hosted on `GitHub`_
+* Please use `GitHub issues`_ to submit bugs and report issues
+
+.. _rc-switch: https://github.com/sui77/rc-switch
+.. _rc-switch Wiki: https://github.com/sui77/rc-switch/wiki
+.. _BSD Licence: http://www.linfo.org/bsdlicense.html
+.. _GitHub: https://github.com/milaq/rpi-rf
+.. _GitHub issues: https://github.com/milaq/rpi-rf/issues
+.. _examples: https://github.com/milaq/rpi-rf/blob/master/examples
+.. _send.py: https://github.com/milaq/rpi-rf/blob/master/examples/send.py
+.. _receive.py: https://github.com/milaq/rpi-rf/blob/master/examples/receive.py
+
+