# ratgdo

This is a port of the ratgdo software for the v2 board to esphome.

[Visit the github.io page to purchase boards](https://paulwieland.github.io/ratgdo/#order)

This project is not affiliated with ratgdo or Paul Wieland. Please buy his boards to support his excellent work.

## Moving from stock ratgdo

- Use the [`Logs & Console`](https://paulwieland.github.io/ratgdo/flash.html) to view and make note of the current rolling code
- Flash the new ESPHome based firmware using the [Web Installer](https://esphome-ratgdo.github.io/esphome-ratgdo/)
- Use the `number` entity in Home Assistant or the built-in ESPHome web-server to set the rolling code.

<img width="560" alt="number_entity" src="https://github.com/ESPHome-RATGDO/esphome-ratgdo/assets/663432/e177029e-f42f-46a8-a87a-81fa04caaa57">

# First use

The ESPHome firmware will allow you to open the door to any position after calibration. To calibrate the door, open and close it once without stopping.

<img width="560" alt="position_demo" src="https://github.com/ESPHome-RATGDO/esphome-ratgdo/assets/663432/22a9873e-67bb-4b2f-bb32-70047cfe666d">


# ESPHome config

- [ESPHome config for v2 board with ESP8266 D1 Mini lite](https://github.com/ESPHome-RATGDO/esphome-ratgdo/blob/main/static/v2board_esp8266_d1_mini_lite.yaml)
- [ESPHome config for v2 board with ESP32 D1 Mini](https://github.com/ESPHome-RATGDO/esphome-ratgdo/blob/main/static/v2board_esp32_d1_mini.yaml)
- [Web Installer](https://esphome-ratgdo.github.io/esphome-ratgdo/)

![Home Assistant Screen Shot](static/hass.png)