Note: When downloading files from Github, click the file then use download button to download. 
Do not right click file link and save as. It will save an HTML file format not the binary file.


1) Place BootloaderUpdater_f48_v1.00.fal on a MicroSD card (32GB or Smaller, formatted Fat32).
2) Place MicroSD card into controller and apply power.
3) The application will be loaded and the screen will prompt to remove sd card and power down then up.
4) Remove SD card.
5) Power Down/up
6) The application will replace bootloader.

7) Place .fl2 file MicroSd card 
8) Power Down/Up
9) The firmware will install
10) Remove card when finished and power down/up.
11) Controller will boot 
12) ESP Firmware will be sent to ESP. (2 files)