https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r179461 | russell | 2009-03-02 16:58:18 -0600 (Mon, 02 Mar 2009) | 8 lines
Ensure that only one thread is calling ast_settimeout() on a channel at a time.
For example, with an IAX2 channel, you can have both the channel thread and the
chan_iax2 processing threads calling this function, and doing so twice at the
same time is a bad thing.
(Found in a debugging session with dvossel and mmichelson)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@179462 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
In this case, it's just a matter of reducing the default timeouts from 2000
to 1000 msec, as the max def feature digit timeout is no longer halved.
........
r178956 | murf | 2009-02-26 14:27:32 -0700 (Thu, 26 Feb 2009) | 18 lines
This change moves the default feature digit timeout to 1000 ms from the previous default of 500.
As per bug 14515, a dev discussion arrived at a "mediated concensus"
of a default feature digit timeout of 1.0 sec. Some voted for 1300;
ctooley thought 1500 for distracted phone users in phone booths;
kpfleming put his foot down at 1.0 sec.
Users who found the previous default max delay of 250 msec perfect,
are welcome to override the new default. Notice that I said that
250 msec was the default; wait a minute, you might say, the config
file said it was 500 msec!; well, because of the bug fix for 14515,
we found that 500 msec was actually enforcing a max of 250. The bug
fix would restore 500 msec, but we felt even that was a bit tight
for most users... 2000 msec was pushed earlier by mmichelson, so
that reduces to 1000 msec after the bug fix. Enjoy!
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@178986 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r178804 | murf | 2009-02-26 10:09:03 -0700 (Thu, 26 Feb 2009) | 28 lines
This patch prevents the feature detection timeout from being cut in half.
Because the ast_channel_bridge() call will return 0 and pass
a frame pointer for both DTMF_BEGIN and DTMF_END, the feature_timer
field in hte config struct is getting decremented twice, which
effectively cuts the digittimeout in half. I added conditions
to the if statement to only let DTMF_END frames to flow thru,
which solved the problem. Also, when the frame pointer is null,
let control flow thru-- this usually happens on timeouts. I added
a comment to the code to explain what's going on and why.
Many thanks to sodom for reporting this problem. Personnally, it always seemed
like something was wrong with the featuredigittimeout, but I never
could quite decide what... and was too busy to investigate.
This bug forced the issue, and now we know.
Sodom had other issues in 14515, but I couldn't reproduce them. If
he still has problems, and wants to get them solved, he is welcome
to reopen 14515.
(closes issue #14515)
Reported by: sodom
Patches:
14515.patch uploaded by murf (license 17)
Tested by: murf, sodom
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@178828 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r178141 | russell | 2009-02-23 17:09:01 -0600 (Mon, 23 Feb 2009) | 14 lines
Fix infinite DTMF when a BEGIN is received without an END.
This commit is related to rev 175124 of 1.4 where a previous attempt was made
to fix this problem. The problem with the previous patch was that the inserted
code needed to go _before_ setting the lastrxts to the current timestamp.
Because those were the same, the dtmfcount variable was never decremented, and
so the END was never sent.
In passing, I removed the dtmfsamples variable which was completed unused. I
also removed a redundant setting of the lastrxts variable.
(closes issue #14460)
Reported by: moliveras
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@178142 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r177786 | tilghman | 2009-02-20 16:59:52 -0600 (Fri, 20 Feb 2009) | 9 lines
Don't print the CR-NL combination when we aren't outputting to the manager.
An embedded CR-NL in a CLI command screws up several AMI parsers that don't
expect to see that combination in the middle of output.
(Closes issue #14305)
Reported by: martins
Patch by: tilghman
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@177787 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
Trunk was already pretty 8-bit clean; but I'm still
removing the --full from the flex command so everything
is uniform.
........
r177540 | murf | 2009-02-19 15:51:37 -0700 (Thu, 19 Feb 2009) | 21 lines
This patch fixes a problem with 8-bit input to the ast_expr2 scanner.
The real culprit was the --full argument to flex
in the Makefile! This causes a 7-bit scanner to be
generated.
I reviewed the rules and found one rule where I needed
to specifically include 8-bit chars for a token.
I tested against the text supplied by ibercom, and
all looks very well.
This has been there a surprisingly long time!
(closes issue #14498)
Reported by: ibercom
Patches:
14498.patch uploaded by murf (license 17)
Tested by: murf
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@177595 65c4cc65-6c06-0410-ace0-fbb531ad65f3
action_bridge() and bridge_exec() both search for the channels to bridge to, and then immediately drop the lock. Instead, they should hold the lock until the masquerade is complete. This will guarantee the channel remains and prevent any other weirdness from occurring. In action_bridge() some more weirdness comes into play. Both channels are needlessly locked at the same time and perform the exact same logic. It makes sense from a coding organizational standpoint, but could cause a theoretical deadlock so I split the code up. There is an issue associated with this, but since its a rather complicated thing to reproduce I'm not certain this alone will close it.
issue# 14296
Review: http://reviewboard.digium.com/r/167/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@177226 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Reason: when I re-engineered the merge_and_delete func to
reduce its lock time, I failed to notice that the
functions it calls still also do locking as before.
This leads to deadlocks on dialplan reloads, when
there are actually living, subscribed hints registered
in the system.
While the reporter come across this problem while using
AEL, I might note that these deadlocks should also happen
if extensions.conf were used.
Here I added these routines to pbx.c:
ast_add_extension_nolock
add_pri_lockopt
ast_add_extension2_lockopt
find_context
add_hint_nolock
All of the above routines are static and restricted
to be used only within pbx.c, and more specifically
within the merge_contexts_and_delete routine.
They are pretty much the same as their counterparts
except they don't lock contexts or hints.
Most of them now do the real work of their
name-alike, with optional locking via extra arguments,
and are called by their name-alike. The goal was to
have the original functions so they would behave
exactly as before.
Both PJ and I tested these fixes, and the deadlocking
problem is no longer encountered.
(closes issue #14357)
Reported by: pj
Patches:
14357.diff uploaded by murf (license 17)
Tested by: pj, murf
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@176943 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The big problem here is that the 3rd argument provided in these uses of strncpy()
did not reserve a byte for the null terminator, leaving the potential for writing
one byte past the end of the buffer.
Aside from this, there were coding guidelines violations with regards to spacing,
as well as hard coded lengths being used instead of sizeof().
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@176901 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r176701 | jpeeler | 2009-02-17 15:54:34 -0600 (Tue, 17 Feb 2009) | 17 lines
Modify bridging to properly evaluate DTMF after first warning is played
The main problem is currently if the Dial flag L is used with a warning sound,
DTMF is not evaluated after the first warning sound. To fix this, a flag has
been added in ast_generic_bridge for playing the warning which ensures that if
a scheduled warning is missed, multiple warrnings are not played back (due to a
feature evaluation or waiting for digits). ast_channel_bridge was modified to
store the nexteventts in the ast_bridge_config structure as that information
was lost every time ast_channel_bridge was reentered, causing a hangup due to
incorrect time calculations.
(closes issue #14315)
Reported by: tim_ringenbach
Reviewed on reviewboard:
http://reviewboard.digium.com/r/163/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@176708 65c4cc65-6c06-0410-ace0-fbb531ad65f3
1) Add module use count handling so that timing modules can be unloaded.
2) Implement unload_module() functions for the timing interface modules.
3) Allow multiple timing modules to be loaded, and use the one with the
highest priority value.
4) Report which timing module is being use in the "timing test" CLI command.
(closes issue #14489)
Reported by: russell
Review: http://reviewboard.digium.com/r/162/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@176666 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch changes the scheduler to use a max-heap to store pending scheduler
entries instead of a fully sorted doubly linked list. When the number of
entries in the scheduler gets large, this will perform much better. For much
more detailed information on this change, see the review request.
Review: http://reviewboard.digium.com/r/160/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@176639 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch includes a number of changes to the indications API. The primary
motivation for this work was to improve stability. The object management
in this API was significantly flawed, and a number of trivial situations could
cause crashes.
The changes included are:
1) Remove the module res_indications. This included the critical functionality
that actually loaded the indications configuration. I have seen many people
have Asterisk problems because they accidentally did not have an
indications.conf present and loaded. Now, this code is in the core,
and Asterisk will fail to start without indications configuration.
There was one part of res_indications, the dialplan applications, which did
belong in a module, and have been moved to a new module, app_playtones.
2) Object management has been significantly changed. Tone zones are now
managed using astobj2, and it is no longer possible to crash Asterisk by
issuing a reload that destroys tone zones while they are in use.
3) The API documentation has been filled out.
4) The API has been updated to follow our naming conventions.
5) Various bits of code throughout the tree have been updated to account
for the API update.
6) Configuration parsing has been mostly re-written.
7) "Code cleanup"
The code is from svn/asterisk/team/russell/indications/.
Review: http://reviewboard.digium.com/r/149/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@176627 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The problem here is that the hint processing code was subscribed to the wrong
event type. So, it started processing state for a hint too soon, before the
device state cache had been updated.
Also, fix a similar bug in app_queue, as it was also subscribed to the wrong
event type.
(closes issue #14461)
Reported by: alecdavis
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@176557 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r176216 | kpfleming | 2009-02-16 15:10:38 -0600 (Mon, 16 Feb 2009) | 3 lines
fix a flaw in the ast_string_field_build() family of API calls; these functions made no attempt to reuse the space already allocated to a field, so every time the field was written it would allocate new space, leading to what appeared to be a memory leak.
........
r176254 | kpfleming | 2009-02-16 15:41:46 -0600 (Mon, 16 Feb 2009) | 3 lines
correct a logic error in the last stringfields commit... don't mark additional space as allocated if the string was built using already-allocated space
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@176255 65c4cc65-6c06-0410-ace0-fbb531ad65f3
I was finding that on my dev box, occasionally attempting to "stop now" in
trunk would cause Asterisk to hang. I traced this to the fact that the logger
thread was waiting on a condition which had already been signalled. The logger
thread also need to be sure to check the value of the close_logger_thread variable.
The close_logger_thread variable is only checked when the list of logmessages is empty.
This allows for the logger thread to print and free any pending messages before exiting.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@176174 65c4cc65-6c06-0410-ace0-fbb531ad65f3
1) It had numerous coding guidelines violations with regards to formatting.
2) It allocated memory using ast_calloc() that was never freed.
3) It didn't check for failure from the allocation.
4) It used sprintf() and strcat() to build the result, doing zero checking to
prevent writing past the end of the provided buffer.
The function also lacks API documentation, but that has not been addressed in
this commit.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@175829 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch adds passthrough, file recording and file playback support for the codecs listed above, with negotiation over SIP/SDP supported. Due to Asterisk's current limitation of treating a codec/bitrate combination as a unique codec, only G.722.1 at 32 kbps and G.722.1C at 48 kbps are supported.
Along the way, some related work was done:
1) The rtpPayloadType structure definition, used as a return result for an API call in rtp.h, was moved from rtp.c to rtp.h so that the API call was actually usable. The only previous used of the API all was chan_h323.c, which had a duplicate of the structure definition instead of doing it the right way.
2) The hardcoded SDP sample rates for various codecs in chan_sip.c were removed, in favor of storing these sample rates in rtp.c along with the codec definitions there. A new API call was added to allow retrieval of the sample rate for a given codec.
3) Some basic 'a=fmtp' parsing for SDP was added to chan_sip, because chan_sip *must* decline any media streams offered for these codecs that are not at the bitrates that we support (otherwise Bad Things (TM) would result).
Review: http://reviewboard.digium.com/r/158/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@175508 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r175311 | tilghman | 2009-02-12 15:19:40 -0600 (Thu, 12 Feb 2009) | 9 lines
Fix crashes when receiving certain T.38 packets. Also, increase the maximum
size of T.38 packets and warn users when they try to set the limits above those
maximums.
(closes issue #13050)
Reported by: schern
Patches:
20090212__bug13050.diff.txt uploaded by Corydon76 (license 14)
Tested by: schern
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@175334 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r175294 | jpeeler | 2009-02-12 14:34:36 -0600 (Thu, 12 Feb 2009) | 9 lines
Fix ParkedCall event information for From field in the case of a blind transfer
If the parker information can not be obtained from the peer, try and see if
the BLINDTRANSFER channel variable has been set. Previously, a blind transfer
to the ParkAndAnnounce app would return nothing for the From.
Closes AST-189
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@175298 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r175187 | jpeeler | 2009-02-12 11:57:10 -0600 (Thu, 12 Feb 2009) | 6 lines
Fix crash in event of failed attempt to transfer to parking
The peer may not necessarily exist, such as in the case of a transfer to
ParkAndAnnounce. In this case don't try to play a sound to it.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@175188 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r175124 | russell | 2009-02-12 10:51:13 -0600 (Thu, 12 Feb 2009) | 27 lines
Don't send DTMF for infinite time if we do not receive an END event.
I thought that this was going to end up being a pretty gnarly fix, but it turns
out that there was actually already a configuration option in rtp.conf,
dtmftimeout, that was intended to handle this situation. However, in between
Asterisk 1.2 and Asterisk 1.4, the code that processed the option got lost.
So, this commit brings it back to life.
The default timeout is 3 seconds. However, it is worth noting that having
this be configurable at all is not really the recommended behavior in RFC 2833.
From Section 3.5 of RFC 2833:
Limiting the time period of extending the tone is necessary
to avoid that a tone "gets stuck". Regardless of the
algorithm used, the tone SHOULD NOT be extended by more than
three packet interarrival times. A slight extension of tone
durations and shortening of pauses is generally harmless.
Three seconds will pretty much _always_ be far more than three packet
interarrival times. However, that behavior is not required, so I'm going to
leave it with our legacy behavior for now.
Code from svn/asterisk/team/russell/issue_14460
(closes issue #14460)
Reported by: moliveras
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@175125 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Russell Bryant
Jason Parker
Joshua Colp
Steve Murphy
Tilghman Lesher
Michiel van Baak
Sean Bright
Jeff Peeler
Kevin P. Fleming
David Vossel
Doug Bailey
Olle Johansson
Mark Michelson