https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r113296 | file | 2008-04-08 12:03:43 -0300 (Tue, 08 Apr 2008) | 4 lines
If audio suddenly gets fed into one side of a channel after a lapse of frames flush the other factory so that old audio does not remain in the factory causing the sync code to not execute.
(closes issue #12296)
Reported by: jvandal
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@113297 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r113065 | mmichelson | 2008-04-07 11:08:45 -0500 (Mon, 07 Apr 2008) | 13 lines
This fix prevents a deadlock that was experienced in chan_local. There was
deadlock prevention in place in chan_local, but it would not work in a specific
case because the channel was recursively locked. By unlocking the channel prior
to calling the generator's generate callback in ast_read_generator_actions(), we
prevent the recursive locking, and therefore the deadlock.
(closes issue #12307)
Reported by: callguy
Patches:
12307.patch uploaded by putnopvut (license 60)
Tested by: callguy
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@113066 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r112468 | mmichelson | 2008-04-02 12:36:04 -0500 (Wed, 02 Apr 2008) | 13 lines
Fix a race condition in the manager. It is possible that a new manager event
could be appended during a brief time when the manager is not waiting for input.
If an event comes during this period, we need to set an indicator that there is an
event pending so that the manager doesn't attempt to wait forever for an event that
already happened.
(closes issue #12354)
Reported by: bamby
Patches:
manager_race_condition.diff uploaded by bamby (license 430)
(comments added by me)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@112469 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Reported by: falves11
Patches:
12298.patch1 uploaded by murf (license 17)
Tested by: murf
I have hopes that the changes made over the last few days will
finalize and solidify this code. While there are bound to be
small tweaks still needed, I feel that the job (at last) is
somewhat completed. Finally, I had a chance to comprehend how
the scoring of extension patterns was done in the previous
version, and I've come very close to using the exact same
criteria in the new pattern matching code. The left-right
sorting is now replicated in the trie structure itself, such
that the first match found will the 'best' match. Compared
the results against 1.4 for several extensions. Replicated
falves11's setup and it works. Used some devious patterns
provided by jsmith, supplemented with a few of my own.
Looks good.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@112289 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r111391 | murf | 2008-03-27 07:03:28 -0600 (Thu, 27 Mar 2008) | 9 lines
These small documentation updates made in response to a query in
asterisk-users, where a user was using Playback, but needed the
features of Background, and had no idea that Background existed,
or that it might provide the features he needed. I thought the
best way to avert these kinds of queries was to provide "See Also"
references in all three of "Background", "Playback", "WaitExten".
Perhaps a project to do this with all related apps is in order.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@111410 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r111245 | qwell | 2008-03-26 18:26:33 -0500 (Wed, 26 Mar 2008) | 9 lines
Remove excessive smoother optimization that was causing audio glitches (small "pops")
after (about 200ms later) an "incorrectly" sized frame was received.
While it would be very nice to keep this as optimized as possible, it makes no sense
for the smoother to be dropping random bits of audio like this. Isn't that the
whole point of a smoother?
Closes issue #12093.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@111246 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Per comments from dimas:
1. The code now generates DTMF_BEGIN frames in addition to DTMF_END ones.
2. "quelching" rewritten - now each detector (MF/DTMF/generic tone) may mark fragment of a frame for suppression (squelching, muting) with a call to mute_fragment. Actual muting happens only once at the very end of ast_dsp_process where all marked fragments are zeroed. This way every detector sees original data in the frame without any piece of a frame being zeroed by a detector which was run before.
3. DTMF detector tries to "mute" one block before and one block after the block where actual tone was detected. Muting of previois block is something new for this patch. Obviously this operation is not always possible - if current frame does not contain data for previous block - it is too late. But at least we make our best.
Muting of next block was already done by the old code but it only affects part of the next block which is in the frame being processed. New code keeps this information in state structures so it will mute proper number of samples in the next frame(s) too.
4. Removed ast_dsp_digitdetect and ast_dsp_getdigits APIs because these are not used.
5. DSP API extended a bit - ast_dsp_was_muted() function added which returns true if DSP code was muting any fragment in the last frame. chan_zap uses this function to decide it needs to turn on confmute on the channel.
This is to replace AST_FRAME_DTMF 'm'/'u' (mute/unmute) functionality.
(closes issue #11968)
Reported by: dimas
Patches:
v2-11968-dsp.patch uploaded by dimas (license 88)
v4-11968-zap.patch uploaded by dimas (license 88)
Tested by: dimas, qwell
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@111022 65c4cc65-6c06-0410-ace0-fbb531ad65f3
change, it was possible to start Asterisk with the manager interface enabled, then
either comment out the enabled option or make manager.conf unopenable and the manager
interface would still be enabled.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@110831 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r110628 | file | 2008-03-25 11:37:35 -0300 (Tue, 25 Mar 2008) | 4 lines
Add an option (transmit_silence) which transmits silence during both Record() and DTMF generation. The reason this is an option is that in order to transmit silence we have to setup a translation path. This may not be needed/wanted in all cases.
(closes issue #10058)
Reported by: tracinet
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@110629 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r110395 | russell | 2008-03-20 18:13:56 -0500 (Thu, 20 Mar 2008) | 9 lines
Shorten the ast_waitfor() timeout from 500 ms to 50 ms in the autoservice thread.
This really should not make a difference except in very rare cases. That case would
be that all of the channels in autoservice are not generating any frames. In that
case, this change reduces the potential amount of time that a thread waits in
ast_autoservice_stop() for the autoservice thread to wrap back around to the beginning
of its loop.
(closes issue #12266, reported by dimas)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@110396 65c4cc65-6c06-0410-ace0-fbb531ad65f3
other than 8 kHz. The issue here is that format modules give a "whennext" sample
value, which is used to calculate when to set a timer for to retrieve the next
frame. However, the zaptel timer operates on 8 kHz samples, so this must be taken
into account.
(another part of issue #12164, reported by milazzo and jsmith, patch by me)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@110303 65c4cc65-6c06-0410-ace0-fbb531ad65f3
G.722 music on hold working for me.
(issue #12164, reported by milazzo and jsmith, patches by me)
res/res_musiconhold.c:
- I moved a single line so that the sample queue update happened before
ast_write(). The reason that this was a bug is that the G.722 frame
originally says it has 320 samples in it (which is correct). However,
when the frame is written to a channel that uses RTP, main/rtp.c modifies
the frame to cut the number of samples in half before it sends it on
the wire. This is to account for the stupid incorrect G.722 spec that
makes it so we have to lie about the number of samples with RTP. I should
probably go and re-work the RTP code so it doesn't modify the frame so
that a bug like this won't happen in the future. However, this change to
MOH is harmless.
main/channel.c:
- I made two fixes in regards to generator timing. Generators use samples
for timing. However, this code assumed 8 kHz samples. In one case, it was
a hard coded 160 samples, that is now written as the sample rate / 50. The
other place was dealing with timing a generator based on frames coming from
the other direction. However, that would have only worked if the sample
rates for the formats in both directions were the same. The code now takes
into account that the sample rates may differ, and scales the generator
samples accordingly.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@110268 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r110019 | file | 2008-03-19 15:20:28 -0300 (Wed, 19 Mar 2008) | 6 lines
Make sure that the mark bit does not incorrectly cause video frame timestamps to be calculated as if they are audio frames.
(closes issue #11429)
Reported by: sperreault
Patches:
11429-frametype.diff uploaded by qwell (license 4)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@110020 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r109908 | murf | 2008-03-19 09:41:13 -0600 (Wed, 19 Mar 2008) | 72 lines
(closes issue #11442)
Reported by: tzafrir
Patches:
11442.patch uploaded by murf (license 17)
Tested by: murf
I didn't give tzafrir very much time to test this, but if he does
still have remaining issues, he is welcome to
re-open this bug, and we'll do what is called for.
I reproduced the problem, and tested the fix, so I hope I
am not jumping by just going ahead and committing the fix.
The problem was with what file_save does with templates;
firstly, it tended to print out multiple options:
[my_category](!)(templateref)
instead of
[my_category](!,templateref)
which is fixed by this patch.
Nextly, the code to suppress output of duplicate declarations
that would occur because the reader copies inherited declarations
down the hierarchy, was not working. Thus:
[master-template](!)
mastervar = bar
[template](!,master-template)
tvar = value
[cat](template)
catvar = val
would be rewritten as:
;!
;! Automatically generated configuration file
;! Filename: experiment.conf (/etc/asterisk/experiment.conf)
;! Generator: Manager
;! Creation Date: Tue Mar 18 23:17:46 2008
;!
[master-template](!)
mastervar = bar
[template](!,master-template)
mastervar = bar
tvar = value
[cat](template)
mastervar = bar
tvar = value
catvar = val
This has been fixed. Since the config reader 'explodes' inherited
vars into the category, users may, in certain circumstances, see
output different from what they originally entered, but it should
be both correct and equivalent.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@109942 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Jason Parker
Joshua Colp
Mark Michelson
Dwayne M. Hubbard
Tilghman Lesher
Terry Wilson
Steve Murphy
Jeff Peeler
Russell Bryant
Kevin P. Fleming