A crash was seen on a system that ran out of memory due to Asterisk not
checking for vector allocation failures in format_cap.c. With this
change, if either of the AST_VECTOR_INIT calls fail, we will return a
value indicating failure.
Change-Id: Ieb9c59f39dfde6d11797a92b45e0cf8ac5722bc8
Users of functions which call __ast_str_helper() such as the ones listed
below are likely to not check the return value for failure so ensuring
that the string is always nil terminated is a good safety measure.
ast_str_set_va()
ast_str_append_va()
ast_str_set()
ast_str_append()
Change-Id: I36ab2d14bb6015868b49329dda8639d70fbcae07
The memory corruption could happen if the [section](+) is the last section
in the file with trailing comments. In this case process_text_line() has
left *last_cat is set to newcat and newcat is destroyed.
Change-Id: I0d1d999f553986f591becd000e7cc6ddfb978d93
An #include right after a [section](+) would associate any variable
assignments before a new section in the #include with the wrong section.
* Fix section association by setting the current section to the appended
section.
* Fix '+' and '!' section flag interaction corner case depending upon
which flag came first. If the '!' came first then it would be ignored.
If the '!' came after then it would affect the appended section. The '!'
will now no longer be ignored.
ASTERISK-25461 #close
Reported by: Sean Pimental
Change-Id: Ic9d3191c8758048e2cbce6432f854b32531731c3
When GetConfigJSON was introduced back in 1.6, it returned each
section as an array of strings: ["key=value", "key2=value2"].
Afterwards, it was changed a few times and became
["key": "value", "key2": "value2"], which is not a correct JSON.
This patch fixes that by constructing a JSON object {} instead of
an array [].
Also, the keys "istemplate" and "tempates" that are used to
indicate templates and their inherited categories are now wrapped in
quotes.
ASTERISK-25391 #close
Reported by: Bojan Nemčić
Change-Id: Ibbe93c6a227dff14d4a54b0d152341857bcf6ad8
There was a problem observed where the "logger add channel" CLI command
would allow for a channel with the same name to be added multiple times.
This would result in each message being written out to the same file
multiple times.
The problem was due to the difference in how logger channel filenames
are stored versus the format they are allowed to be presented when they
are added. For instance, if adding the logger channel "foo" through the
CLI, the result would be a logger channel with the file name
/var/log/asterisk/foo being stored. So when trying to add another "foo"
channel, "foo" would not match "/var/log/asterisk/foo" so we'd happily
add the duplicate channel.
The fix presented here is to introduce two new methods in the logger
code:
* make_filename(): given a logger channel name, this creates the
filename for that logger channel.
* find_logchannel(): given a logger channel name, this calls
make_filename() and then traverses the list of logchannels in order
to find a match.
This change has made use of make_filename() and find_logchannel()
throughout to more consistently behave.
ASTERISK-25305 #close
Reported by Mark Michelson
Change-Id: I892d52954d6007d8bc453c3cbdd9235dec9c4a36
When leaving a bridge, indications on a channel could be swallowed by
the internal indication logic because it appears that the channel is on
its way to be hung up anyway. One such situation where this is
detrimental is when channels on hold are redirected out of a bridge. The
AST_CONTROL_UNHOLD indication from the bridging code is swallowed,
leaving the channel in question to still appear to be on hold.
The fix here is to modify the logic inside ast_indicate_data() to not
drop the indication if the channel is simply leaving a bridge. This way,
channels on hold redirected out of a bridge revert to their expected "in
use" state after the redirection.
ASTERISK-25418 #close
Reported by Mark Michelson
Change-Id: If6115204dfa0551c050974ee138fabd15f978949
Page uses the async method of dialing with the dial API. When a call gets
forwarded there is no calling channel available. If the predial handler
was set then the calling channel could not be put into auto-service
for the forwarded call because it doesn't exist. A crash is the result.
* Moved the callee predial parameter string processing to before the
string is passed to the dial API rather than having the dial API do it.
There are a few benefits do doing this. The first is the predial
parameter string processing doesn't need to be done for each channel
called by the dial API. The second is in async mode and the forwarded
channel is to have the predial handler executed on it then the
non-existent calling channel does not need to be present to process the
predial parameter string.
* Don't start auto-service on a non-existent calling channel to execute
the predial handler when the dial API is in async mode and forwarding a
call.
ASTERISK-25384 #close
Reported by: Chet Stevens
Change-Id: If53892b286d29f6cf955e2545b03dcffa2610981
This patch adds support for receiving events regarding Peer status changes
and Contact status changes. This is particularly useful in scenarios where
we are subscribed to all endpoints and channels, where we often want to know
more about the state of channel technology specific items than a single
endpoint's state.
ASTERISK-24870
Change-Id: I6137459cdc25ce27efc134ad58abf065653da4e9
Currently, Asterisk will log to the last configured syslog
channel in logger.conf. This is due to the fact that the
final call to openlog() supersedes all of the previous calls.
This commit removes the call to openlog() and passes the
facility to ast_log_vsyslog(), along with utilizing the
LOG_MAKEPRI macro to ensure that the message is routed to
the correct facility and with the correct priority.
ASTERISK-25407 #close
Reported by: Elazar Broad
Tested by: Elazar Broad
Change-Id: Ie2a2416bc00cce1b04e99ef40917c2011953ddd2
When changing a hint extension without removing the hint first the
device state and presence state is not updated. This causes the state
of the hint to be that of the previous extension and not the current
one. This state is kept until a state change occurs as a result of
something (presence state change, device state change).
This change updates the hint with the current device and presence
state of the new extension when it is changed. Any state callbacks
which may have been added before the hint extension is changed are
also informed of the new device and presence state if either have
changed.
ASTERISK-25394 #close
Change-Id: If268f1110290e502c73dd289c9e7e7b27bc8432f
When Asterisk translates between codecs, each with a different frame size (for
example between iLBC 30 and Speex-WB), too large frames were created by
ast_trans_frameout. Now, ast_trans_frameout is called with the correct frame
length, creating several frames when necessary. Affects all transcoding modules
which used ast_trans_frameout: GSM, iLBC, LPC10, and Speex.
ASTERISK-25353 #close
Change-Id: I2e229569d73191d66a4e43fef35432db24000212
It has been observed that on long-running busy systems, a scheduler
context can eventually hit INT_MAX for its assigned IDs and end up
overflowing into a very low negative number. When this occurs, this can
result in odd behaviors, because a negative return is interpreted by
callers as being a failure. However, the item actually was successfully
scheduled. The result may be that a freed item remains in the scheduler,
resulting in a crash at some point in the future.
The scheduler can overflow because every time that an item is added to
the scheduler, a counter is bumped and that counter's current value is
assigned as the new item's ID.
This patch introduces a new method for assigning scheduler IDs. Instead
of assigning from a counter, a queue of available IDs is maintained.
When assigning a new ID, an ID is pulled from the queue. When a
scheduler item is released, its ID is pushed back onto the queue. This
way, IDs may be reused when they become available, and the growth of ID
numbers is directly related to concurrent activity within a scheduler
context rather than the uptime of the system.
Change-Id: I532708eef8f669d823457d7fefdad9a6078b99b2
Asterisk can load and register an object type while still having an invalid
sorcery mapping. This can cause an issue when a creation call is invoked.
For example, mis-configuring PJSIP's endpoint identifier by IP address mapping
in sorcery.conf will cause the sorcery mechanism to be invalidated; however, a
subsequent ARI invocation to create the object will cause a crash, as the
internal type may not be registered as sorcery expects.
Merely checking for a NULL pointer here solves the issue.
Change-Id: I54079fb94a1440992f4735a9a1bbf1abb1c601ac
In ast_endpoint_snapshot_create(), a failure to init the
string fields results in two attempts to ao2_cleanup the
same pointer. Removed RAII_VAR to eliminate problem.
ASTERISK-25375 #close
Reported by: Scott Griepentrog
Change-Id: If4d9dfb1bbe3836b623642ec690b6d49b25e8979
When issuing the "core show hints" CLI command a combination of both
the hint extension and context is created. This uses a fixed size
buffer expecting that the extension will not exceed maximum extension
length. When the extension is actually a pattern match this constraint
does not hold true, and the extension may exceed the maximum extension
length. In this case extra characters are written past the end of the
fixed size buffer.
This change makes it so the construction of the combined hint extension
and context can not exceed the size of the buffer.
ASTERISK-25367 #close
Change-Id: Idfa1b95d0d4dc38e675be7c1de8900b3f981f499
A deadlock was observed where three threads were competing for different
locks:
* One thread held the hints lock and was attempting to lock a specific
hint.
* One thread was holding the specific hint's lock and was attempting to
lock the contexts lock
* One thread was holding the contexts lock and attempting to lock the
hints lock.
Clearly the second thread was doing the wrong thing here. The fix for
this is to make sure that the hint's lock is not held on presence state
changes. Something similar is already done (and commented about) for
device state changes.
ASTERISK-25362 #close
Reported by Mark Michelson
Change-Id: I15ec2416b92978a4c0c08273b2d46cb21aff97e2
When unreferencing a taskprocessor its reference count is checked
to determine if it should be unlinked from the taskprocessors
container and its listener shut down. In between the time when the
reference count is checked and unlinking it is possible for
another thread to jump in, find it, and get a reference to it. If
the thread then uses the taskprocessor it may find that it is not
in the state it expects.
This change locks the taskprocessors container during almost the
entire unreference operation to ensure that any other thread which
may attempt to find the taskprocessor has to wait.
ASTERISK-25295
Change-Id: Icb842db82fe1cf238da55df92e95938a4419377c
When deleting a scheduled item if the item in question is currently
executing the ast_sched_del function waits until it has completed.
This is accomplished using ast_cond_wait. Unfortunately the
ast_cond_wait function can suffer from spurious wakeups so the
predicate needs to be checked after it returns to make sure it has
really woken up as a result of being signaled.
This change adds a loop around the ast_cond_wait to make sure that
it only exits when the executing task has really completed.
ASTERISK-25355 #close
Change-Id: I51198270eb0b637c956c61aa409f46283432be61
When executing an action in a bridge it is possible for the
channel to be hung up without the bridge becoming aware of it.
This is most easily reproducible by hanging up when the bridge
is streaming DTMF due to a feature timeout. This change makes
it so after action execution the channel is checked to determine
if it has been hung up and if it has it is kicked from the bridge.
ASTERISK-25341 #close
Change-Id: I6dd8b0c3f5888da1c57afed9e8a802ae0a053062
When allocating a sorcery object, fail if the
id value was not allocated.
ASTERISK-25323
Reported by: Scott Griepentrog
Change-Id: I152133fb7545a4efcf7a0080ada77332d038669e
The built frame format in audiohook_read_frame_both() is now set to a
signed linear format before the rx and tx frames are duplicated instead of
only for the mixed audio frame duplication.
ASTERISK-25322 #close
Reported by Sean Pimental
Change-Id: I86f85b5c48c49e4e2d3b770797b9d484250a1538
Some codecs that may be a third party library to Asterisk need to have
knowledge of the format attributes that were negotiated. Unfortunately,
when the great format migration of Asterisk 13 occurred, that ability
was lost.
This patch adds an API call, ast_format_attribute_get, to the core
format API, along with updates to the unit test to check the new API
call. A new callback is also now available for format attribute modules,
such that they can provide the format attribute values they manage.
Note that the API returns a void *. This is done as the format attribute
modules themselves may store format attributes in any particular manner
they like. Care should be taken by consumers of the API to check the
return value before casting and dereferencing. Consumers will obviously
need to have a priori knowledge of the type of the format attribute as
well.
Change-Id: Ieec76883dfb46ecd7aff3dc81a52c81f4dc1b9e3
An http request can be sent to get the existing Asterisk logs.
The command "curl -v -u user:pass -X GET 'http://localhost:8088
/ari/asterisk/logging'" can be run in the terminal to access the
newly implemented functionality.
* Retrieve all existing log channels
ASTERISK-25252
Change-Id: I7bb08b93e3b938c991f3f56cc5d188654768a808
An http request can be sent to create a log channel
in Asterisk.
The command "curl -v -u user:pass -X POST
'http://localhost:088/ari/asterisk/logging/mylog?
configuration=notice,warning'" can be run in the terminal
to access the newly implemented functionality for ARI.
* Ability to create log channels using ARI
ASTERISK-25252
Change-Id: I9a20e5c75716dfbb6b62fd3474faf55be20bd782
An http request can be sent to delete a log channel
in Asterisk.
The command "curl -v -u user:pass -X DELETE 'http://localhost:8088
/ari/asterisk/logging/mylog'" can be run in the terminal
to access the newly implemented functionally for ARI.
* Able to delete log channels using ARI
ASTERISK-25252
Change-Id: Id6eeb54ebcc511595f0418d586ff55914bc3aae6
An http request can be sent to rotate a specified log channel.
If the channel does not exist, an error response will be
returned.
The command "curl -v -u user:pass -X PUT 'http://localhost:8088
/ari/asterisk/logging/logChannelName/rotate'" can be run in the
terminal to access this new functionality.
* Added the ability to rotate log files through ARI
ASTERISK-25252
Change-Id: Iaefa21cbbc1b29effb33004ee3d89c977e76ab01
ast_rtp_codecs_get_payload() gets called once or twice for every received
RTP frame so it would be nice to not allocate an ao2 object to then have
it destroyed shortly thereafter. The ao2 object gets allocated only if
the payload type is not set by the channel driver as a negotiated value.
The issue affects chan_skinny, chan_unistim, chan_rtp, and chan_ooh323.
* Made static_RTP_PT[] an array of ao2 objects that
ast_rtp_codecs_get_payload() can return instead of an array of structs
that must be copied into a created ao2 object.
ASTERISK-25296 #close
Reported by: Richard Mudgett
Change-Id: Icb6de5cd90bfae07d44403a1352963db9109dac0
* Fix off nominial ref leak of new_type in
ast_rtp_codecs_payloads_set_m_type().
* No need to lock static_RTP_PT_lock in
ast_rtp_codecs_payloads_set_m_type() and
ast_rtp_codecs_payloads_set_rtpmap_type_rate() before the payload type
parameter sanity check.
* No need to create ast_rtp_payload_type ao2 objects with a lock since the
lock is not used.
Change-Id: I64dd1bb4dfabdc7e981e3f61448beac9bb7504d4
This event is necessary for the bridge_wait_e_options test to be able to
confirm that ringing is being played on the local channel that runs the
BridgeWait() application with the e(r) option.
ASTERISK-25292 #close
Reported by Kevin Harwell
Change-Id: Ifd3d3d2bebc73344d4b5310d0d55c7675359d72e
Joshua Colp
Mark Michelson
Richard Mudgett
Ivan Poddubny
Matt Jordan
Elazar Broad
Alexander Traud
Guido Falsi
Scott Griepentrog
Scott Emidy
Benjamin Ford