https://origsvn.digium.com/svn/asterisk/branches/10
................
r332321 | twilson | 2011-08-17 13:09:49 -0500 (Wed, 17 Aug 2011) | 17 lines
Merged revisions 332320 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r332320 | twilson | 2011-08-17 12:35:27 -0500 (Wed, 17 Aug 2011) | 10 lines
Don't read from a disarmed or invalid timerfd
Numerous isues have been reported for deadlocks that are caused by
a blocking read in res_timing_timerfd on a file descriptor that will
never be written to. This patch adds some checks to make sure that
the timerfd is both valid and armed before calling read().
Should fix: ASTERISK-18142, ASTERISK-18166, ASTERISK-18197, AST-486,
AST-495, AST-507 and possibly others.
Review: https://reviewboard.asterisk.org/r/1361/
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@332337 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/10
................
r331039 | kmoore | 2011-08-08 15:53:30 -0500 (Mon, 08 Aug 2011) | 18 lines
Merged revisions 331038 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r331038 | kmoore | 2011-08-08 15:52:45 -0500 (Mon, 08 Aug 2011) | 11 lines
In-queue MOH stops after a periodic announcement
If the seek value is past the end of file when resuming G.722 MOH, MOH will
cease to function for the duration of the MOH session through all starts and
stops until saved state is cleared. Adjusting the code to guarantee a single
valid read (which is already assumed) fixes the bug.
(closes issue ASTERISK-18077)
Review: https://reviewboard.asterisk.org/r/1328/
Tested-by: Jonathan Rose <jrose@digium.com>
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@331040 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.10
................
r328824 | kmoore | 2011-07-19 13:05:21 -0500 (Tue, 19 Jul 2011) | 18 lines
Merged revisions 328823 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r328823 | kmoore | 2011-07-19 12:57:18 -0500 (Tue, 19 Jul 2011) | 11 lines
RTP bridge away with inband DTMF and feature detection
When deciding whether Asterisk was allowed to bridge the call away from the
core, chan_sip did not take into account the usage of features on dialed
channels that require monitoring of DTMF on channels utilizing inband DTMF.
This would cause Asterisk to allow the call to be locally or remotely bridged,
preventing access to the data required to detect activations of such features.
(closes 17237)
Review: https://reviewboard.asterisk.org/r/1302/
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@328825 65c4cc65-6c06-0410-ace0-fbb531ad65f3
generating party time to send its own T.38 reinvite.
Also don't forward frames through the gateway if we are negotiating T.38.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@327511 65c4cc65-6c06-0410-ace0-fbb531ad65f3
It was inconsistent to have the silk and celt format attribute
modules in the format file interpreter folder.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@327116 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch adds pass-through support for CELT. CELT
formats are defined in codecs.conf and can be configured
to any sample rate a CELT endpoint supports. This patch also
addresses a crash in channel.c resulting from a frame list being
freed incorrectly. This crash was discovered while testing a CELT
translator which had to split encoded audio into multiple frames.
The codec translator is not a part of this patch, but may be
contributed in the future.
Review: https://reviewboard.asterisk.org/r/1294/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@326855 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r326689 | jrose | 2011-07-07 11:04:51 -0500 (Thu, 07 Jul 2011) | 10 lines
res_odbc patch by tilghman to fix integers with null values
Addresses some improper sql statements in res_odbc that would cause an update to fail on
realtime peers due to trying to set as "(NULL)" rather than an actual NULL.
(closes issue #1922STERISK-17791)
Reported by: marcelloceschia
Patches:
20110505__issue19223.diff.txt uploaded by tilghman (license 14)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@326694 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r326484 | dvossel | 2011-07-06 10:26:49 -0500 (Wed, 06 Jul 2011) | 10 lines
Reverts fix for timerfd locking issue.
jrose discovered a performance issue with this
fix that prevents his analog phones from working
when using timerfd as a timing source. Until
it is understood what is causing this performance
problem, this patch is being reverted.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@326485 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r326411 | tilghman | 2011-07-05 17:08:29 -0500 (Tue, 05 Jul 2011) | 14 lines
Add the attribute "type" to each "<use>" for menuselect.
This matters only when autoconf fails to detect that weak linking is supported.
External optional dependencies will become optional in both cases, as they are
removed at compile time when not detected. However, runtime-optional modules
are made mandatory when weak linking is not found. This change affects only
the external optional dependencies; previously, they were incorrectly required
when weak linking support was not detected.
Patches:
20110702__issue18062__asterisk_trunk.diff.txt by tilghman (License #5003)
Tested by: iasgoscouk
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@326412 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r325821 | jrose | 2011-06-30 14:17:32 -0500 (Thu, 30 Jun 2011) | 10 lines
Fixes an issue with Music on Hold classes losing files in playlist when realtime is used.
The bug occurs rather intermittently and I relied on the reporters to test the patch.
After a sanity check and some testing, I'm giving it an OK.
(closes issue ASTERISK-17875)
Reported by: David Cunningham
Patches:
res_musiconhold.c.mohrt17875_v1 uploaded by Igor Goncharovsky (license #5009)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@325864 65c4cc65-6c06-0410-ace0-fbb531ad65f3
terminal). Can be enabled on a channel by setting FAXOPT(gateway)=yes in the
dialplan.
Big thanks to irroot for porting this code to use the framehooks api.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@325816 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Asterisk now has protocol independent support for processing text messages
outside of a call. Messages are routed through the Asterisk dialplan.
SIP MESSAGE and XMPP are currently supported. There are options in sip.conf
and jabber.conf that enable these features.
There is a new application, MessageSend(). There are two new functions,
MESSAGE() and MESSAGE_DATA(). Documentation will be available on
the project wiki, wiki.asterisk.org.
Thanks to Terry Wilson for the assistance with development and to David Vossel
for helping with some additional testing.
Review: https://reviewboard.asterisk.org/r/1042/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@321546 65c4cc65-6c06-0410-ace0-fbb531ad65f3
state of the channel reverts to unknown this should be rejected.
this is important for negotiating T.38 gateway see #13405
This patch adds a option T38_REJECTED that behaves as T38_DISABLED except it reports state rejected.
Trivial Change to res_fax to honnor UNAVAILABLE and REJECTED states.
(closes issue #18889)
Reported by: irroot
Tested by: irroot, darkbasic, mnicholson
Review: https://reviewboard.asterisk.org/r/1115
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@319087 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r318919 | bbryant | 2011-05-13 14:04:50 -0400 (Fri, 13 May 2011) | 10 lines
This patch fixes an issue with SRTP which makes HOLD/UNHOLD impossible when too
much time has passed between sending audio.
(closes issue #18206)
Reported by: bernhardsi
Patches:
res_srtp_unhold.patch uploaded by bernhards (license 1138)
Tested by: bernhards, notthematrix
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@318920 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r318351 | rmudgett | 2011-05-09 18:15:32 -0500 (Mon, 09 May 2011) | 6 lines
Remove references to res_features and its export file.
The contents of res/res_features.c was moved to into main/features.c
awhile ago. There is no longer any need for the res/Makefile to reference
res_features or the res_features linker exports file to exist.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@318352 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r314780 | russell | 2011-04-22 09:02:23 -0500 (Fri, 22 Apr 2011) | 18 lines
Merged revisions 314778 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
........
r314778 | russell | 2011-04-22 08:58:03 -0500 (Fri, 22 Apr 2011) | 11 lines
Initialize buffers in getvar and getvarfull.
Initialize the buffers used to hold the result from GET VARIABLE or
GET VARIABLE FULL. The bug report shows func_read returning garbage in
the result. It assumed that the buffer passed in was initialized, like many
other functions do. In the more common code path (through the dialplan), it
is initialized, so just initialize it here too.
(closes issue #19050)
Reported by: johnz
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@314781 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r314069 | rmudgett | 2011-04-18 11:10:10 -0500 (Mon, 18 Apr 2011) | 22 lines
The AsyncAGI command loop is lax in the value it returns for the return status.
* Return correct status: SUCCESS/FAILED/HANGUP. Previously, abnormal
exits from the command loop such as hangup would return SUCCESS.
* The "asyncagi break" command now returns SUCCESS and is now the only way
to break the command loop with that status. Previously, it returned
FAILED.
* The AMI event AsyncAGI End is no longer sent if the AsyncAGI Start event
is not sent. Previously, this happened because of an error setting up the
AGI pipes.
* All executed AGI commands now get an AsyncAGI Exec result event.
Previously, if the command returned failure (because of hangup), the
command loop just exited with FAILURE and did not send the AsyncAGI Exec
result event.
* Makes sure that the channel frame queue is empty on hangup.
Review: https://reviewboard.asterisk.org/r/1183/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@314080 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This fixes a regression in the media architecture change
where video frames did not have their video mark set
correctly. dvossel wrote this. twilson kindly committed
this, mmichelson found the bug.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@313822 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r313700 | rmudgett | 2011-04-13 17:52:47 -0500 (Wed, 13 Apr 2011) | 5 lines
Revert flushing stale AsyncAGI commands from -r313615.
It looks like it was intentional to leave any commands or in-flight
commands in the queue in case Async AGI is run again on the call.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@313701 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r313588 | rmudgett | 2011-04-13 11:31:50 -0500 (Wed, 13 Apr 2011) | 55 lines
Merged revisions 313579 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r313579 | rmudgett | 2011-04-13 11:29:49 -0500 (Wed, 13 Apr 2011) | 48 lines
Merged revisions 313545 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r313545 | rmudgett | 2011-04-13 11:21:24 -0500 (Wed, 13 Apr 2011) | 41 lines
Asterisk does not hangup a channel after endpoint hangs up.
If the call that the dialplan started an AGI script for is hungup while
the AGI script is in the middle of a command then the AGI script is not
notified of the hangup. There are many AGI Exec commands that this can
happen with. The reported applications have been: Background, Wait, Read,
and Dial. Also the AGI Get Data command.
* Don't wait on the Asterisk channel after it has hung up. The channel is
likely to never need servicing again.
* Restored the AGI script's ability to return the AGI_RESULT_HANGUP value
in run_agi(). It previously only could return AGI_RESULT_SUCCESS or
AGI_RESULT_FAILURE after the DeadAGI and AGI applications were merged.
(closes issue #17954)
Reported by: mn3250
Patches:
issue17954_v1.8.patch uploaded by rmudgett (license 664)
issue17954_v1.6.2.patch uploaded by rmudgett (license 664)
issue17954_v1.4.patch uploaded by rmudgett (license 664)
Tested by: rmudgett
JIRA SWP-2171
(closes issue #18492)
Reported by: devmod
Tested by: rmudgett
JIRA SWP-2761
(closes issue #18935)
Reported by: nvitaly
Tested by: astmiv, rmudgett
JIRA SWP-3216
(closes issue #17393)
Reported by: siby
Tested by: rmudgett
JIRA SWP-2727
Review: https://reviewboard.asterisk.org/r/1165/
........
................
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@313606 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Terry Wilson
Kinsey Moore
Kevin P. Fleming
Matthew Nicholson
Leif Madsen
Jonathan Rose
David Vossel
Tilghman Lesher
Russell Bryant
Richard Mudgett
Gregory Nietsky
Paul Belanger
Brett Bryant
Tzafrir Cohen