Instead of a recompile, allow values to be adjusted in dsp.conf
For binary distributions allows easy adjustment for wobbly GSM calls, and other reasons.
Defaults to DTMF_HITS_TO_BEGIN=2 and DTMF_MISSES_TO_END=3
(closes issue ASTERISK-17493)
Reported by: alecdavis
Tested by: alecdavis
alecdavis (license 585)
Review https://reviewboard.asterisk.org/r/2144/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@374479 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Asterisk's DTMF Specifications are based on AT&T specs, which may not be compatible in other countries.
Various countries have different specifications for the maximum power level differences
between the DTMF low group and high group of frequencies.
Power level difference between frequencies for different Administrations/RPOAs
NTT = Max. 5 dB
AT&T = 4dB(reverse) to 8dB(normal)
Danish = Max. 6 dB
Australian = Max. 10 dB
Brazilian = Max. 9 dB
ETSI = Max. 6 dB from ETSI ES 201 235-3 V1.3.1 (2006-03)
Now allow 4 variables to be individually configured in dsp.conf, with reasonable min/max of 2dB to 20dB.
Default is AT&T specifications
Add's the following variables to dsp.conf
;dtmf_normal_twist=6.31
;dtmf_reverse_twist=2.51
;relax_dtmf_normal_twist=6.31
;relax_dtmf_reverse_twist=3.98
(closes issue ASTERISK-20442)
Reported by: tbsky
Tested by: tbsky,alecdavis
alecdavis (license 585)
Review https://reviewboard.asterisk.org/r/2141/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@374384 65c4cc65-6c06-0410-ace0-fbb531ad65f3
In order to better handle RTP sources with strictrtp enabled (which is now default in 10)
using the learning mode to figure out new sources when they change is handled by checking
for a number of consecutive (by sequence number) packets received to an rtp struct
based on a new configurable value called 'probation'. Also, during learning mode instead
of liberally accepting all packets received, we now reject packets until a clear source
has been determined.
Review: https://reviewboard.asterisk.org/r/1663/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@351287 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Like Dial and Queue, FollowMe needs to deal with
AST_CONTROL_CONNECTED_LINE information so when the parties are initially
bridged, the connected line information will be correct.
* Added the 'I' option just like the app_dial and app_queue 'I' option.
(closes issue ASTERISK-18969)
Reported by: rmudgett
Tested by: rmudgett
Review: https://reviewboard.asterisk.org/r/1656/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@350364 65c4cc65-6c06-0410-ace0-fbb531ad65f3
It is possible to enumerate SIP usernames when the general and user/peer
nat settings differ in whether to respond to the port a request is sent
from or the port listed for responses in the Via header. In 1.4 and 1.6.2,
this would mean if one setting was nat=yes or nat=route and the other was
either nat=no or nat=never. In 1.8 and 10, this would mean when one was
nat=force_rport and the other was nat=no.
In order to address this problem, it was decided to switch the default
behavior to nat=yes/force_rport as it is the most commonly used option
and to strongly discourage setting nat per-peer/user when at all possible.
For more discussion of the issue, please see:
http://lists.digium.com/pipermail/asterisk-dev/2011-November/052191.html
(closes issue ASTERISK-18862)
Review: https://reviewboard.asterisk.org/r/1591/
........
Merged revisions 345776 from http://svn.asterisk.org/svn/asterisk/branches/1.4
........
Merged revisions 345800 from http://svn.asterisk.org/svn/asterisk/branches/1.6.2
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@345828 65c4cc65-6c06-0410-ace0-fbb531ad65f3
JIRA ASTERISK-17183
Multi-parkinglot directs calls to wrong parkinglot.
JIRA ASTERISK-17870
Cannot retrieve parked calls.
JIRA ASTERISK-17430
ParkedCall() with no extension should pickup first available call and does not.
JIRA AST-576
Issues with parking lots
* Removed searching for parking lots by extension. Parking lots can only
be found by the parking lot name since parking lot access extensions and
spaces are not guaranteed to be unique.
* Added parking_lot_name option to the Park and ParkedCall applications.
Updated documentation for Park and ParkedCall applications.
* Add parkext_exclusive configuration option to make parking entry
extensions specify which parking lot they access.
(closes issue ASTERISK-17183)
Reported by: David Cabrejos
Tested by: rmudgett, David Cabrejos
(closes issue ASTERISK-17870)
Reported by: Remi Quezada
(closes issue ASTERISK-17430)
Reported by: Philippe Lindheimer
JIRA ASTERISK-17452
Parking_offset not used
JIRA AST-624
'next' setting for findslot does nothing
* Reimplemented since findslot feature option broken by -r114655.
(closes issue ASTERISK-17452)
Reported by: David Woolley
Tested by: rmudgett
JIRA ASTERISK-15792
Dialplan continues execution after transfer to park.
This happens for DTMF attended transfer, DTMF blind transfer, and DTMF
one-touch-parking if the party initiating these features also initiated
the call.
* Fixed the return code from the affected builtin features when parking a
call.
(closes issue ASTERISK-15792)
Reported by: Mat Murdock
Tested by: rmudgett, twilson
JIRA AST-607
The courtesytone is not playing to the expected call when picking up a
parked call.
This is mostly a documentation problem. However, the option is not reset
to the default when features.conf is reloaded.
* Updated features.conf.sample documentation for courtesytone and
parkedplay options.
* Reset the parkedplay option to default when features.conf is reloaded.
JIRA AST-615
AMI Park action followed by features reload results in orphaned channels
in parking lot.
* Reloading features.conf will not touch parking lots that have calls
still parked in them. Reload again at a later time.
Misc additional fixes:
* Added unit test for parking lot dialplan usage checking.
* Made update connected line when a parked call is retrieved from a
parking lot.
* Made retrieved parked call stop ringing or MOH depending upon how the
call was waiting in the parking lot.
* Made CLI "features show" indicate if the parking lot is enabled for use.
* Added PARKINGDYNEXTEN channel variable to allow dynamic parking lots to
specify the parking lot access extension.
* Made AMI ParkedCalls action ParkedCall events have a Parkinglot header.
* Made AMI ParkedCalls action ParkedCallsComplete event have a Total
header.
* Fixed potential deadlock from AMI Park action holding channel locks
while calling masq_park_call().
* Fixed several places where ast_strdupa() were used inside of loops.
(Mostly fixed by refactoring the loop body into its own function.)
* Fixed copy_parkinglot() copying too much from the source parking lot.
Extracted the parking lot configuration settings into struct
parkinglot_cfg.
* Refactored courtesytone playing code to put the channel not playing the
tone in autoservice.
* Fix when pbx-parkingfailed is played that the other channel is put in
autoservice if it exists.
* Fixed parkinglot reference leak in parked_call_exec() error paths.
* Fixed parkinglot_unref() use of parkinglot after it was unreffed.
* Made destroy the struct ast_parkinglot parkings lock when done.
* Refactored the features.conf parking lot configuration code to eliminate
redundancy.
* Fixed feature reload to better protect parking lots.
* Fixed parking lot container reference leak in handle_parkedcalls().
* Fixed the total count in handle_parkedcalls().
Review: https://reviewboard.asterisk.org/r/1358/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@332100 65c4cc65-6c06-0410-ace0-fbb531ad65f3
setting of HASH(SIP_CAUSE,<chan name>) on the channel.
Having chan_sip set HASH(SIP_CAUSE,<chan name>) on the channel carries a
significant performance penalty because of the usage of the MASTER_CHANNEL()
dialplan function.
AST-580
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@332021 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The addition of connected line support in v1.8 changes the behavior of the
channel caller ID somewhat. The channel caller ID value no longer time
shares with the connected line ID on outgoing call legs. The timing of
some AMI events/responses output the connected line ID as caller ID.
These party ID's are now separate.
* The ConnectedLineNum and ConnectedLineName headers were added to many
AMI events/responses if the CallerIDNum/CallerIDName headers were also
present.
(closes issue #18252)
Reported by: gje
Tested by: rmudgett
Review: https://reviewboard.asterisk.org/r/1227/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@320823 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Add ConnectedLineNum and ConnectedLineName headers to the output of the
AMI action Status. This makes it easier to find out who the channel is
connected to without having to lookup BridgedChannel or when they are
connected to an application (e.g.: VoiceMail) which has no bridged
channel.
* Bridged channels with no CallerID had "" instead of "<unknown>" output,
that might be a bug as "<unknown>" was what older versions used.
(closes issue #18158)
Reported by: gareth
Patches:
svn-292308.diff uploaded by gareth (license 208)
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@320650 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Update README, CHANGES, and Makefile. Direct users to
http://wiki.asterisk.org for documentation or to the
AST.txt and AST.pdf included in the tarball.
(closes issue #18443)
Reported by: bas
Patches:
changes.diff uploaded by lathama (license 1028)
readme.diff uploaded by lathama (license 1028)
Tested by: lathama bas
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@305560 65c4cc65-6c06-0410-ace0-fbb531ad65f3
So far all our tools for viewing and manipulating media streams
within Asterisk have been entirely focused on audio. That made
sense then, but is not scalable now. The FrameHook API lets us
tap into and manipulate _ANY_ type of media or signaling passed
on a channel present today or in the future. This tool is a step
in the direction of expanding Asterisk's boundaries and will help
generate some rather interesting applications in the future.
In addition to the FrameHook API, a simple dialplan function
exercising the api has been included as well. This function
is called FRAME_TRACE(). FRAME_TRACE() allows for the internal
ast_frames read and written to a channel to be output. Filters
can be placed on this function to debug only certain types of frames.
This function could be thought of as an internal way of doing
ast_frame packet captures.
Review: https://reviewboard.asterisk.org/r/925/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@287647 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This is a new feature that allows for parking to custom parking lots to be
accessed directly, rather than with channel variables or by changing the
default parking lot. The extension is set with the parkext option just as the
default parking lot is done. Also, the manager action has been updated to
optionally allow a specified parking lot.
(closes issue #14882)
Reported by: vmikhnevych
Patches:
patch_14882.txt uploaded by mnick (license 874)
modified by me
Review: https://reviewboard.asterisk.org/r/884/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@286931 65c4cc65-6c06-0410-ace0-fbb531ad65f3
OPTIONS requests should be treated the same as an INVITE
This includes authentication. This patch adds the ability for
incoming out of dialog OPTION requests to be authenticated
before providing a response indicating whether an extension
is available or not. The authentication routine works the
exact same way as it does for incoming INVITEs. This means
that if a peer has 'insecure=invite' in their peer definition,
the same will be true for the processing of the OPTIONS request.
Review: https://reviewboard.asterisk.org/r/881/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@284950 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The problem I'm addressing is that Asterisk's current
method of building the least cost translation paths
between codecs does not take into account sample rate.
For instance, it was possible for siren14 (a 32khz codec),
to contain the a translation path to siren7 (a 16khz
audio codec) that goes through slin at 8khz. In this
case Asterisk takes a 32khz codec, down samples it to
8khz and then up samples it to 16khz which is terrible
regardless if it is computationally less expensive. This
patch now builds translation paths that give priority to
maintaining the best possible sample rate before taking
into consideration computational cost. This patch also
adds cli commands to expose what translation paths are
actually being used.
Changes:
1. Translation paths will never contain a step that changes
the sample rate unless absolutely necessary.
2. When choosing the best codec to make two channels compatible.
Shared codecs with the highest sample rate are given priority.
3. A new cli command to show all translation paths available
for a specific codec 'core show translation paths [codec name]'
has been added.
4. 'core show translation' which displays the translation
matrix now includes the new higher bit audio codecs in the table.
5. 'core show channel [channel name]' now displays the
translation paths if translation is used.
(closes issue #16841)
Reported by: dvossel
Review: https://reviewboard.asterisk.org/r/842/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@282047 65c4cc65-6c06-0410-ace0-fbb531ad65f3
sip.conf configuration for the channel and for devices.
The Max-Forwards header is used to prevent loops in a SIP network. Each intermediary,
like SIP proxys and SBCs, decrement this counter and detects when it reaches zero,
at which point the SIP request is nicely killed in a SIP-friendly way.
Review: https://reviewboard.asterisk.org/r/778/
Thanks to dvossel for the review and good advice.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@276951 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This adds a generic API for accommodating IPv6 and IPv4 addresses
within Asterisk. While many files have been updated to make use of the
API, chan_sip and the RTP code are the files which actually support
IPv6 addresses at the time of this commit. The way has been paved for
easier upgrading for other files in the near future, though.
Big thanks go to Simon Perrault, Marc Blanchet, and Jean-Philippe Dionne
for their hard work on this.
(closes issue #17565)
Reported by: russell
Patches:
asteriskv6-test-report.pdf uploaded by russell (license 2)
Review: https://reviewboard.asterisk.org/r/743
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@274783 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch as documented in the sample config allows one to optionally apply
white, black, or both types of filtering to manager events. The new
'eventfilter' option is set per user.
(closes issue #14861)
Reported by: fnordian
Patches:
eventfilter3.patch uploaded by fnordian (license 110),
modified by me
Review: https://reviewboard.asterisk.org/r/673/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@271868 65c4cc65-6c06-0410-ace0-fbb531ad65f3
