In ast_endpoint_snapshot_create(), a failure to init the
string fields results in two attempts to ao2_cleanup the
same pointer. Removed RAII_VAR to eliminate problem.
ASTERISK-25375 #close
Reported by: Scott Griepentrog
Change-Id: If4d9dfb1bbe3836b623642ec690b6d49b25e8979
When issuing the "core show hints" CLI command a combination of both
the hint extension and context is created. This uses a fixed size
buffer expecting that the extension will not exceed maximum extension
length. When the extension is actually a pattern match this constraint
does not hold true, and the extension may exceed the maximum extension
length. In this case extra characters are written past the end of the
fixed size buffer.
This change makes it so the construction of the combined hint extension
and context can not exceed the size of the buffer.
ASTERISK-25367 #close
Change-Id: Idfa1b95d0d4dc38e675be7c1de8900b3f981f499
A deadlock was observed where three threads were competing for different
locks:
* One thread held the hints lock and was attempting to lock a specific
hint.
* One thread was holding the specific hint's lock and was attempting to
lock the contexts lock
* One thread was holding the contexts lock and attempting to lock the
hints lock.
Clearly the second thread was doing the wrong thing here. The fix for
this is to make sure that the hint's lock is not held on presence state
changes. Something similar is already done (and commented about) for
device state changes.
ASTERISK-25362 #close
Reported by Mark Michelson
Change-Id: I15ec2416b92978a4c0c08273b2d46cb21aff97e2
When unreferencing a taskprocessor its reference count is checked
to determine if it should be unlinked from the taskprocessors
container and its listener shut down. In between the time when the
reference count is checked and unlinking it is possible for
another thread to jump in, find it, and get a reference to it. If
the thread then uses the taskprocessor it may find that it is not
in the state it expects.
This change locks the taskprocessors container during almost the
entire unreference operation to ensure that any other thread which
may attempt to find the taskprocessor has to wait.
ASTERISK-25295
Change-Id: Icb842db82fe1cf238da55df92e95938a4419377c
When deleting a scheduled item if the item in question is currently
executing the ast_sched_del function waits until it has completed.
This is accomplished using ast_cond_wait. Unfortunately the
ast_cond_wait function can suffer from spurious wakeups so the
predicate needs to be checked after it returns to make sure it has
really woken up as a result of being signaled.
This change adds a loop around the ast_cond_wait to make sure that
it only exits when the executing task has really completed.
ASTERISK-25355 #close
Change-Id: I51198270eb0b637c956c61aa409f46283432be61
When executing an action in a bridge it is possible for the
channel to be hung up without the bridge becoming aware of it.
This is most easily reproducible by hanging up when the bridge
is streaming DTMF due to a feature timeout. This change makes
it so after action execution the channel is checked to determine
if it has been hung up and if it has it is kicked from the bridge.
ASTERISK-25341 #close
Change-Id: I6dd8b0c3f5888da1c57afed9e8a802ae0a053062
When allocating a sorcery object, fail if the
id value was not allocated.
ASTERISK-25323
Reported by: Scott Griepentrog
Change-Id: I152133fb7545a4efcf7a0080ada77332d038669e
The built frame format in audiohook_read_frame_both() is now set to a
signed linear format before the rx and tx frames are duplicated instead of
only for the mixed audio frame duplication.
ASTERISK-25322 #close
Reported by Sean Pimental
Change-Id: I86f85b5c48c49e4e2d3b770797b9d484250a1538
Some codecs that may be a third party library to Asterisk need to have
knowledge of the format attributes that were negotiated. Unfortunately,
when the great format migration of Asterisk 13 occurred, that ability
was lost.
This patch adds an API call, ast_format_attribute_get, to the core
format API, along with updates to the unit test to check the new API
call. A new callback is also now available for format attribute modules,
such that they can provide the format attribute values they manage.
Note that the API returns a void *. This is done as the format attribute
modules themselves may store format attributes in any particular manner
they like. Care should be taken by consumers of the API to check the
return value before casting and dereferencing. Consumers will obviously
need to have a priori knowledge of the type of the format attribute as
well.
Change-Id: Ieec76883dfb46ecd7aff3dc81a52c81f4dc1b9e3
An http request can be sent to get the existing Asterisk logs.
The command "curl -v -u user:pass -X GET 'http://localhost:8088
/ari/asterisk/logging'" can be run in the terminal to access the
newly implemented functionality.
* Retrieve all existing log channels
ASTERISK-25252
Change-Id: I7bb08b93e3b938c991f3f56cc5d188654768a808
An http request can be sent to create a log channel
in Asterisk.
The command "curl -v -u user:pass -X POST
'http://localhost:088/ari/asterisk/logging/mylog?
configuration=notice,warning'" can be run in the terminal
to access the newly implemented functionality for ARI.
* Ability to create log channels using ARI
ASTERISK-25252
Change-Id: I9a20e5c75716dfbb6b62fd3474faf55be20bd782
An http request can be sent to delete a log channel
in Asterisk.
The command "curl -v -u user:pass -X DELETE 'http://localhost:8088
/ari/asterisk/logging/mylog'" can be run in the terminal
to access the newly implemented functionally for ARI.
* Able to delete log channels using ARI
ASTERISK-25252
Change-Id: Id6eeb54ebcc511595f0418d586ff55914bc3aae6
An http request can be sent to rotate a specified log channel.
If the channel does not exist, an error response will be
returned.
The command "curl -v -u user:pass -X PUT 'http://localhost:8088
/ari/asterisk/logging/logChannelName/rotate'" can be run in the
terminal to access this new functionality.
* Added the ability to rotate log files through ARI
ASTERISK-25252
Change-Id: Iaefa21cbbc1b29effb33004ee3d89c977e76ab01
ast_rtp_codecs_get_payload() gets called once or twice for every received
RTP frame so it would be nice to not allocate an ao2 object to then have
it destroyed shortly thereafter. The ao2 object gets allocated only if
the payload type is not set by the channel driver as a negotiated value.
The issue affects chan_skinny, chan_unistim, chan_rtp, and chan_ooh323.
* Made static_RTP_PT[] an array of ao2 objects that
ast_rtp_codecs_get_payload() can return instead of an array of structs
that must be copied into a created ao2 object.
ASTERISK-25296 #close
Reported by: Richard Mudgett
Change-Id: Icb6de5cd90bfae07d44403a1352963db9109dac0
* Fix off nominial ref leak of new_type in
ast_rtp_codecs_payloads_set_m_type().
* No need to lock static_RTP_PT_lock in
ast_rtp_codecs_payloads_set_m_type() and
ast_rtp_codecs_payloads_set_rtpmap_type_rate() before the payload type
parameter sanity check.
* No need to create ast_rtp_payload_type ao2 objects with a lock since the
lock is not used.
Change-Id: I64dd1bb4dfabdc7e981e3f61448beac9bb7504d4
This event is necessary for the bridge_wait_e_options test to be able to
confirm that ringing is being played on the local channel that runs the
BridgeWait() application with the e(r) option.
ASTERISK-25292 #close
Reported by Kevin Harwell
Change-Id: Ifd3d3d2bebc73344d4b5310d0d55c7675359d72e
Currently, if a blank musiconhold.conf is used, musiconhold will fail
to start for a channel going into a holding bridge with an anticipation
of getting music on hold. That being the case, no frames will be written
to the channel and that can pose a problem for blind transfers in PJSIP
which may rely on frames being written to get past the REFER framehook.
This patch makes holding bridges start a silence generator if starting
music on hold fails and makes it so that if no music on hold functions
are installed that the ast_moh_start function will report a failure so
that consumers of that function will be able to respond appropriately.
ASTERISK-25271 #close
Change-Id: I06f066728604943cba0bb0b39fa7cf658a21cd99
This change adds support for the 'rtp_timeout' and 'rtp_timeout_hold'
endpoint options. These allow the channel to be hung up if RTP
is not received from the remote endpoint for a specified number of
seconds.
ASTERISK-25259 #close
Change-Id: I3f39daaa7da2596b5022737b77799d16204175b9
Commit 54b25c80c8 solved an issue where a
specific scenario involving local channels and a native local RTP bridge
could result in ringback still being heard on a calling channel even
after the call is bridged.
That commit caused many tests in the testsuite to fail with alarming
consequences, such as not sending DialBegin and DialEnd events, and
giving incorrect hangup causes during calls.
This commit reverts the previous commit and implements and alternate
solution. This new solution involves only passing AST_CONTROL_RINGING
frames across local channels if the local channel is in AST_STATE_RING.
Otherwise, the frame does not traverse the local channels. By doing
this, we can ensure that a playtones generator does not get started on
the calling channel but rather is started on the local channel on which
the ringing frame was initially indicated.
ASTERISK-25250 #close
Reported by Etienne Lessard
Change-Id: I3bc87a18a38eb2b68064f732d098edceb5c19f39
Previous changes to sample rate support in audiohooks accidentally
removed code responsible for allowing the manipulate audiohooks
to work. Without this code the manipulated frame would be dropped
and not used. This change restores it.
ASTERISK-25253 #close
Change-Id: I3ff50664cd82faac8941f976fcdcb3918a50fe13
Control frames with a -1 payload are used as a special signal to stop
playtones generators on channels. This indication is sent both by
app_dial as well as by ast_answer() when a call is answered in case any
tones were being generated on a calling channel.
This control frame type was made to stop traversing local channel pairs
as an optimization, because it was thought that it was unnecessary to
send these indications, and allowing such unnecessary control frames to
traverse the local channels would cause the local channels to optimize
away less quickly.
As it turns out, through some special magic dialplan code, it is
possible to have a tones being played on a non-local channel, and it is
important for the local channel to convey that the tones should be
stopped. The result of having tones continue to be played on the
non-local channel is that the tones play even once the channel has been
bridged. By not blocking the -1 control frame type, we can ensure that
this situation does not happen.
ASTERISK-25250 #close
Reported by Etienne Lessard
Change-Id: I0bcaac3d70b619afdbd0ca8a8dd708f33fd2f815
Due to changes in audiohooks to support different sample rates the
underlying storage of samples is in the format of the audiohook
itself and not of the format being requested. This means that if a
channel is using G722 the samples stored will be at 16kHz. If
something subsequently reads from the audiohook at a format which
is not the same sample rate as the audiohook the number of samples
needs to be adjusted.
Given the following example:
1. Channel writing into audiohook at 16kHz (as it is using G722).
2. Chanspy reading from audiohook at 8kHz.
The original code would read 160 samples from the audiohook for
each 20ms of audio. This is incorrect. Since the audio in the
audiohook is at 16kHz the actual number needing to be read is 320.
Failure to read this much would cause the audiohook to reset
itself constantly as the buffer became full.
This change adjusts the requested number of samples by determining
the duration of audio requested and then calculating how many
samples that would be in the audiohook format.
ASTERISK-25247 #close
Change-Id: Ia91ce516121882387a315fd8ee116b118b90653d
This adds an "rtp_keepalive" option for PJSIP endpoints. Similar to the
chan_sip option, this specifies an interval, in seconds, at which we
will send RTP comfort noise frames. This can be useful for keeping RTP
sessions alive as well as keeping NAT associations alive during lulls.
ASTERISK-25242 #close
Reported by Mark Michelson
Change-Id: I06660ba672c0a343814af4cec838e6025cafd54b
Fixes for issues with the ASTERISK-24934 patch.
* Fixed ast_escape_alloc() and ast_escape_c_alloc() if the s parameter is
an empty string. If it were an empty string the functions returned NULL
as if there were a memory allocation failure. This failure caused the AMI
VarSet event to not get posted if the new value was an empty string.
* Fixed dest buffer overwrite potential in ast_escape() and
ast_escape_c(). If the dest buffer size is smaller than the space needed
by the escaped s parameter string then the dest buffer would be written
beyond the end by the nul string terminator. The num parameter was really
the dest buffer size parameter so I renamed it to size.
* Made nul terminate the dest buffer if the source string parameter s was
an empty string in ast_escape() and ast_escape_c().
* Updated ast_escape() and ast_escape_c() doxygen function description
comments to reflect reality.
* Added some more unit test cases to /main/strings/escape to cover the
empty source string issues.
ASTERISK-25255 #close
Reported by: Richard Mudgett
Change-Id: Id77fc704600ebcce81615c1200296f74de254104
If a sorcery wizard does not support one of the 'optional' CRUD
operations (namely the CUD), log a WARNING message so we are aware of
why the operation failed. This also removes an assert in this case, as
the CUD operation may have been triggered by an external system, in
which case it is not a programming error but a configuration error.
Change-Id: Ifecd9df946d9deaa86235257b49c6e5e24423b53
An http request can be sent to retrieve information on a single
module, including the resource name, description, use count, status,
and support level.
The command "curl -v -u user:pass -X GET 'http://localhost:8088/ari
/asterisk/modules/{moduleName}'" (or something similar, depending on
configuration) can be run in the terminal to access this new
functionality.
For more information, see:
https://wiki.asterisk.org/wiki.display/~bford/Asterisk+ARI+Resource
* Added new ARI functionality
* Information on a single module can now be retrieved
ASTERISK-25173
Change-Id: Ibce5a94e70ecdf4e90329cf0ba66c33a62d37463
During an attended transfer a thread is started that handles imparting the
bridge channel. From the start of the thread to when the bridge channel is
ready exists a gap that can potentially cause problems (for instance, the
channel being swapped is hung up before the replacement channel enters the
bridge thus stopping the transfer). This patch adds a condition that waits
for the impart thread to get to a point of acceptable readiness before
allowing the initiating thread to continue.
ASTERISK-24782
Reported by: John Bigelow
Change-Id: I08fe33a2560da924e676df55b181e46fca604577
Some individual fields may fail their conversion due to their default
values being invalid for their custom handlers. In particular,
configuration values that depend on others being enabled (and thus have
an empty default value) are notorious for tripping this routine up. An
example of this are any of the DTLS options for endpoints. Any of the
DTLS options will fail to be applied (as DTLS is not enabled), causing
the entire object set to be aborted.
This patch makes it so that we log a debug message when skipping a
field, and rumble on anyway.
ASTERISK-25238
Change-Id: I0bea13de79f66bf9f9ae6ece0e94a2dc1c026a76
We have a strange relationship between the parsing of format
capabilities from a string and their representation as a string. We
expect the format capabilities to be expressed as a string in the
following format:
allow = !all,ulaw,alaw
disallow = g722
While we would generate the string representation of those formats as:
allow = (ulaw|alaw)
disallow = (ulaw|alaw|g729...)
When the configuration framework needs to store values as a string, it
generates the format capabilities using the second representation; this
representation however cannot be parsed when the entry is rehydrated.
This patch fixes that by updating
ast_format_cap_update_by_allow_disallow to parse an entry as if it were
in the generated format if it has a leading '(' and a trailing ')'.
ASTERISK-25238
Change-Id: I904d43caf4cf45af06f6aee0c9e58556eb91d6ca
Currently, the device state provider API will allow you to register a
device state provider with the same case insensitive name more than
once. This could cause strange issues, as the duplicate device state
providers will not be queried when a device's state has to be polled.
This patch updates the API such that a device state provider with the
same name as one that has already registered will be rejected.
Change-Id: I4a418a12280b7b6e4960bd44f302e27cd036ceb2
An http request can be sent to retrieve a list of all existing modules,
including the resource name, description, use count, status, and
support level.
The command "curl -v -u user:pass -X GET 'http://localhost:8088/ari/
asterisk/modules" (or something similar, depending on configuration)
can be run in the terminal to access this new functionality.
For more information, see:
https://wiki.asterisk.org/wiki.display/~bford/Asterisk+ARI+Resource
* Added new ARI functionality
* Information on modules can now be retrieved
Change-Id: I63cbbf0ec0c3544cc45ed2a588dceabe91c5e0b0
Gerrit is complaining of conflicts when trying to create a patch series
of all of the cherry-picked master commits, so I have instead squashed
it all into one commit.
ASTERISK-25067 #close
Reported by: Matt Jordan
Change-Id: I6dda90343fae24a75dc5beec84980024e8d61eb9
All send/receive processing for a SIP transaction needs to be done under
the same threadpool serializer to prevent reentrancy problems inside
pjproject and res_pjsip.
* Add threadpool API call to get the current serializer associated with
the worker thread.
* Pick a serializer from a pool of default serializers if the caller of
res_pjsip.c:ast_sip_push_task() does not provide one.
This is a simple way to ensure that all outgoing SIP request messages are
processed under a serializer. Otherwise, any place where a pushed task is
done that would result in an outgoing out-of-dialog request would need to
be modified to supply a serializer. Serializers from the default
serializer pool are picked in a round robin sequence for simplicity.
A side effect is that the default serializer pool will limit the growth of
the thread pool from random tasks. This is not necessarily a bad thing.
* Made pjsip_distributor.c save the thread's serializer name on the
outgoing request tdata struct so the response can be processed under the
same serializer.
This is a cherry-pick from master.
**** ASTERISK-25115 Change-Id: Iea71c16ce1132017b5791635e198b8c27973f40a
NOTE: session_inv_on_state_changed() is disassociating the dialog from the
session when the invite dialog becomes PJSIP_INV_STATE_DISCONNECTED.
Unfortunately this is a tad too soon because our BYE request transaction
has not completed yet.
ASTERISK-25183 #close
Reported by: Matt Jordan
Change-Id: I8bad0ae1daf18d75b8c9e55874244b7962df2d0a
Scott Griepentrog
Joshua Colp
Mark Michelson
Richard Mudgett
Matt Jordan
Scott Emidy
Benjamin Ford
Jonathan Rose
Kevin Harwell