Currently, DELETE /ari/channels/<channelID> supports only few hangup reasons.
It's good enough for simple use, but when it needs to set the detail reason,
it comes challenges.
Added reason_code query parameter for that.
ASTERISK-28385
Change-Id: I1cf1d991ffd759d0591b347445a55f416ddc3ff2
According T.38 Gateway 'Use case 3'
https://wiki.asterisk.org/wiki/display/AST/T.38+Gateway
T.38 Gateway should send T.38 negotiation request to called endpoint
if FAX preamble (using V.21 detector) generated by called endpoint.
But it does not, because fax_gateway_detect_v21 constructs T.38
negotiation request, but forwards it only to other channel,
not to the channel on which FAX preamble is detected.
Some SIP endpoints could be improperly configured to rely on the other side
to initiate T.38 re-INVITEs.
With this patch the T.38 Gateway tries to negotiate with both sides
by sending T.38 negotiation request to both endpoints supported T.38.
Change-Id: I73bb24799bfe1a48adae9c034a2edbae54cc2a39
This change adds support for larger TLS certificates by allowing
OpenSSL to fragment the DTLS packets according to the configured
MTU. By default this is set to 1200.
This is accomplished by implementing our own BIO method that
supports MTU querying. The configured MTU is returned to OpenSSL
which fragments the packet accordingly. When a packet is to be
sent it is done directly out the RTP instance.
ASTERISK-28018
Change-Id: If2d5032019a28ffd48f43e9e93ed71dbdbf39c06
The change #10017 "Handle fax gateway being started more than once"
introdiced a bug which leads to segfault in res_fax_spandsp.
The res_fax_spandsp module does not support reserving sessions, so
fax_session_reserve returns a fax session with state AST_FAX_STATE_INACTIVE.
The fax_gateway_start does not create a real fax session if the fax session
is already present and the state is not AST_FAX_STATE_RESERVED.
But the "reserved" session created for res_fax_spandsp has state
AST_FAX_STATE_INACTIVE, so fax_gateway_start not starting.
Then when fax_gateway_framehook is called and gateway T.38 state is
NEGOTIATED the call of gateway->s->tech->write(gateway->s, f) leads to
segfault, because session tech_pvt is not set, i.e. the tech session
was not initialized/started.
This patch adds check also on AST_FAX_STATE_INACTIVE to the "reserved"
session created for res_fax_spandsp will start.
This patch also adds extra check and log ERROR if tech_pvt is not set
before call tech->write.
ASTERISK-27981 #close
Change-Id: Ife3e65e5f18c902db2ff0538fccf7d28f88fa803
This patch adds a channel name to output of CLI 'fax show session'
and also expands the channel name field up to 30 characters on
CLI 'fax show sessions'
Change-Id: Id059c43ff41811f5e76712b83fb63b8f246da953
When monitoring Asterisk instances, it's often useful to know when an
outbound registration fails, as this often maps to the notion of a trunk
and having a trunk fail is usually a "bad thing". As such, this patch
adds monitoring metrics that track the state of PJSIP outbound registrations.
It does this by looking for the Registry events coming across the Stasis
system topic, and publishing those as metrics to Prometheus. Note that
while this may support other outbound registration types (IAX2, SIP, etc.)
those haven't been tested. Your mileage may vary.
(And why are you still using IAX2 and SIP? It's 2019 folks. Get with the
program.)
This patch also adds Sorcery observers to handle modifications to the
underlying PJSIP outbound registration objects. This is useful when a
reload is triggered that modifies the properties of an outbound registration,
or when ARI push configuration is used and an object is updated or
deleted. Because we rely on properties of the registration object to
define the metric (label key/value pairs), we delete the relevant metric when
we notice that something has changed and wait for a new Stasis message to
arrive to re-create the metric.
ASTERISK-28403
Change-Id: If01420e38530fc20b6dd4aa15cd281d94cd2b87e
This patch adds a few CLI commands to the res_prometheus module to aid
system administrators setting up and configuring the module. This includes:
* prometheus show status: Display basic statistics about the Prometheus
module, including its essential configuration, when it was last scraped,
and how long the scrape took. The last two bits of information are useful
when Prometheus isn't generating metrics appropriately, as it will at
least tell you if Asterisk has had its HTTP route hit by the remote
server.
* prometheus show metrics: Dump the current metrics to the CLI. Useful for
system administrators to see what metrics are currently available without
having to cURL or go to Prometheus itself.
ASTERISK-28403
Change-Id: Ic09813e5e14b901571c5c96ebeae2a02566c5172
This patch adds basic Asterisk bridge statistics to the res_prometheus
module. This includes:
* asterisk_bridges_count: The current number of bridges active on the
system.
* asterisk_bridges_channels_count: The number of channels active in a
bridge.
In all cases, enough information is provided with each bridge metric
to determine a unique instance of Asterisk that provided the data, along
with the technology, subclass, and creator of the bridge.
ASTERISK-28403
Change-Id: Ie27417dd72c5bc7624eb2a7a6a8829d7551788dc
This patch adds basic Asterisk endpoint statistics to the res_prometheus
module. This includes:
* asterisk_endpoints_state: The current state (unknown, online, offline)
for each defined endpoint.
* asterisk_endpoints_channels_count: The current number of channels
associated with a given endpoint.
* asterisk_endpoints_count: The current number of defined endpoints.
In all cases, enough information is provided with each endpoint metric
to determine a unique instance of Asterisk that provided the data, as well
as the underlying technology and resource definition.
ASTERISK-28403
Change-Id: I46443963330c206a7d12722d08dcaabef672310e
Using timestamp with signed int will cause timestamps exceeding max value
to be negative.
This causes the jitterbuffer to do passthrough of the packet.
ASTERISK-28421
Change-Id: I9dabd0718180f2978856c50f43aac4e52dc3cde9
This patch adds basic Asterisk channel statistics to the res_prometheus
module. This includes:
* asterisk_calls_sum: A running sum of the total number of
processed calls
* asterisk_calls_count: The current number of calls
* asterisk_channels_count: The current number of channels
* asterisk_channels_state: The state of any particular channel
* asterisk_channels_duration_seconds: How long a channel has existed,
in seconds
In all cases, enough information is provided with each channel metric
to determine a unique instance of Asterisk that provided the data, as
well as the name, type, unique ID, and - if present - linked ID of each
channel.
ASTERISK-28403
Change-Id: I0db306ec94205d4f58d1e7fbabfe04b185869f59
Prometheus is the defacto monitoring tool for containerized applications.
This patch adds native support to Asterisk for serving up Prometheus
compatible metrics, such that a Prometheus server can scrape an Asterisk
instance in the same fashion as it does other HTTP services.
The core module in this patch provides an API that future work can build
on top of. The API manages metrics in one of two ways:
(1) Registered metrics. In this particular case, the API assumes that
the metric (either allocated on the stack or on the heap) will have
its value updated by the module registering it at will, and not
just when Prometheus scrapes Asterisk. When a scrape does occur,
the metrics are locked so that the current value can be retrieved.
(2) Scrape callbacks. In this case, the API allows consumers to be
called via a callback function when a Prometheus initiated scrape
occurs. The consumers of the API are responsible for populating
the response to Prometheus themselves, typically using stack
allocated metrics that are then formatted properly into strings
via this module's convenience functions.
These two mechanisms balance the different ways in which information is
generated within Asterisk: some information is generated in a fashion
that makes it appropriate to update the relevant metrics immediately;
some information is better to defer until a Prometheus server asks for
it.
Note that some care has been taken in how metrics are defined to
minimize the impact on performance. Prometheus's metric definition
and its support for nesting metrics based on labels - which are
effectively key/value pairs - can make storage and managing of metrics
somewhat tricky. While a naive approach, where we allow for any number
of labels and perform a lot of heap allocations to manage the information,
would absolutely have worked, this patch instead opts to try to place
as much information in length limited arrays, stack allocations, and
vectors to minimize the performance impacts of scrapes. The author of
this patch has worked on enough systems that were driven to their knees
by poor monitoring implementations to be a bit cautious.
Additionally, this patch only adds support for gauges and counters.
Additional work to add summaries, histograms, and other Prometheus
metric types may add value in the future. This would be of particular
interest if someone wanted to track SIP response types.
Finally, this patch includes unit tests for the core APIs.
ASTERISK-28403
Change-Id: I891433a272c92fd11c705a2c36d65479a415ec42
You can now add the "include_local_address" flag to an entry in
rtp.conf "[ice_host_candidates]" to include both the advertized
address and the local address in ICE negotiation:
[ice_host_candidates]
192.168.1.1 = 1.2.3.4,include_local_address
This causes both 192.168.1.1 and 1.2.3.4 to be advertized.
Change-Id: Ide492cd45ce84546175ca7d557de80d9770513db
This change fixes two bugs which both resulted in the packet loss
count exceeding 65,000.
The first issue is that the sequence number check to determine if
cycling had occurred was using the wrong variable resulting in the
check never seeing that cycling has occurred, throwing off the
packet loss calculation. It now uses the correct variable.
The second issue is that the packet loss calculation assumed that
the received number of packets in an interval could never exceed
the expected number. In practice this isn't true due to delayed
or retransmitted packets. The expected will now be updated to
the received number if the received exceeds it.
ASTERISK-28379
Change-Id: If888ebc194ab69ac3194113a808c414b014ce0f6
When multiple endpoints try to register close together using the same
AOR with qualify_frequency set, one contact would qualify immediately
while the other contacts would have to wait out the duration of the
timer before being able to qualify. Changing the conditional to check
the contact container count for a non-zero value allows all contacts to
qualify immediately.
Change-Id: I79478118ee7e0d6e76af7c354d66684220db9415
When we use early bridge with create and dial from stasis using Local channel
and the dialplan does not any entry the it is returned from core_local.c with
No such extension .
In such case asterisk locks up till the channel is not hangup with the error
Exceptionally long voice queue length
* Found that in such case app_control_dial fails on ast_call method and
return -1
* Since it is called from stasis_app_send_command_async and return -1 does
not cause resources to be freed and since no PBX exist it is not able to
read from channel causing exceptionally long queue
* After putting this code found that the channel was releasing immediately
and resources were freed.
ASTERISK-28399
Reported by: Abhay Gupta
Tested by: Abhay Gupta
Change-Id: I0a55c923fc6995559f808d63b9488762b4489318
Updated ast_sip_create_rdata_with_contact and registrar_find_contact
to check the return from pjsip_parse_uri before attempting to
use the uri returned.
ASTERISK-28402
Reported-by: Ross Beer
Change-Id: I9810b3b163c45ed5a56ec743586e5ce107f13ba7
The dial bridge is meant to hold channels which have been created
and dialed in stasis. It handles the frames coming from them and raises
the appropriate events.
It was possible for the code to mistakenly place calls which came
from the dialplan into the dial bridge if they were not in an
answered state. These channels are not outgoing channels and
should not be placed into the dial bridge.
The code now checks to ensure that only stasis created channels are
placed into the dial bridge by checking that a PBX does not exist
on the channel.
ASTERISK-27756
Change-Id: Ideee69ff06c9a0b31f7ed61165f5c055f51d21b6
The transport-cc draft is a mechanism by which additional information
about packet reception can be provided to the sender of packets so
they can do sender side bandwidth estimation. This is accomplished
by having a transport specific sequence number and an RTCP feedback
message. This change implements this in the receiver direction.
For each received RTP packet where transport-cc is negotiated we store
the time at which the RTP packet was received and its sequence number.
At a 1 second interval we go through all packets in that period of time
and use the stored time of each in comparison to its preceding packet to
calculate its delta. This delta information is placed in the RTCP
feedback message, along with indicators for any packets which were not
received.
The browser then uses this information to better estimate available
bandwidth and adjust accordingly. This may result in it lowering the
available send bandwidth or adjusting how "bursty" it can be.
ASTERISK-28400
Change-Id: I654a2cff5bd5554ab94457a14f70adb71f574afc
There is enough MWI functionality to warrant it having its own 'c' and header
files. This patch moves all current core MWI data structures, and functions
into the following files:
main/mwi.h
main/mwi.c
Note, code was simply moved, and not modified. However, this patch is also in
preparation for core MWI changes, and additions to come.
Change-Id: I9dde8bfae1e7ec254fa63166e090f77e4d3097e0
Added a new PJSIP global setting called norefersub.
Default is true to keep support working as before.
res_pjsip_refer: Configures PJSIP norefersub capability accordingly.
Checks the PJSIP global setting value.
If it is true (default) it adds the norefersub capability to PJSIP.
If it is false (disabled) it does not add the norefersub capability
to PJSIP.
This is useful for Cisco switches that do not follow RFC4488.
ASTERISK-28375 #close
Reported-by: Dan Cropp
Change-Id: I0b1c28ebc905d881f4a16e752715487a688b30e9
An earlier contributor apparently forgot to run 'make ari-stubs'
before committing after making ARI model changes.
Change-Id: I7813e5638e2821d11f4b968dc2aeab4f725190a6
Reset the internal counter that the AEL2 compiler uses for unique label
names before compiling. This keeps dialplan labels consistent across
reloads assuming the AEL2 has not changed.
ASTERISK-17799 #close
Reported by: Kirill Katsnelson
Change-Id: I30b3cc887d1ee0644d3f341e2fef16f525d7fae5
In AEL2, if a 'for' statement contains macro* calls, like:
for (&iterator(${TRY},A); "${A}" != ""; &iterate(A)) {
The AEL2 parser will translate these into calls to the deprecated Macro
dialplan application and use the antiquated pipe delimiter.
Instead, convert these into calls to the Gosub dialplan application and
use commas as argument separators.
ASTERISK-18593 #close
Reported by: Luke-Jr
* 'macro' in this context means AEL2 macros, not the 'Macro' application
Change-Id: I3d73716033b8e3e42e0209d355bf5f10c97045fc
When generating the regular expression that matches against existing
extensions, we need to escape literal characters that can also be
regular expression metacharacters. This was already being done for '*'
but we need to do the same for '+'.
In passing, remove some unreachable code - strcmp() is already run
immediately when entering extension_matches().
ASTERISK-14939 #close
Reported by: klaus3000
Change-Id: I8d2cccb3479168fba1b0a6704c52198b396468f1
REMB's exponent is 6-bits (0..63) and has a mantissa of 18-bits. We were using
an unsigned integer to represent the bitrate. However, that type is not large
enough to hold all potential bitrate values. If the bitrate is large enough
bits were being shifted off the "front" of the mantissa, which caused the
wrong value to be sent to the browser.
This patch makes it so it now uses a float type to hold the bitrate. Using a
float allows for all bitrate values to be correctly represented.
ASTERISK-28255
Change-Id: Ice00fdd16693b16b41230664be5d9f0e465b239e
It looks like we're not properly calculating jitter values on received
video streams. This patch enables the code that does jitter calculations
for those streams.
Change-Id: Iaac985808829c8f034db8c57318789c4c8c11392
It was difficult to check the channel's current application and
parameters using ARI for current channels. Added app_name, app_data
items to show the current application information.
ASTERISK-28343
Change-Id: Ia48972b3850e5099deab0faeaaf51223a1f2f38c
If Realtime @ variable value is NULL or empty or contains only whitespaces
then when we try to retrieve it using PJSIP_ENDPOINT we get WARNING
pjsip_endpoint_function_read: Unknown property @my_var for PJSIP endpoint.
And the variable is missing in the result of CLI pjsip show endpoint.
This patch keeps empty sorcery extended field.
ASTERISK-28341 #close
Change-Id: I221fccc04cbfa2be17ce971f64ae0e74e465eea0
