r341486 reverts r325483 this is a rework of the patch.
optimize to minimize load.
add option check_state_unknown to control whether a member with unknown
device state is checked there is a small % chance that calls will be sent
to the member when they on a call.
app_queue will see a device with unknown state as available and does not
try verify the state without this option enabled.
Review: https://reviewboard.asterisk.org/r/1535/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/10@341580 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The regression was caused by a call to ast_parse_device_state() in app_queue's
ring_entry() function. The ast_parse_device_state() function eventually calls
ast_channel_get_full() with a channel name prefix which causes it to walk the
channel list causing massive lock contention and slow downs.
This patch fixes the regression by removing the call to
ast_parase_device_state() which should be unnecessary. Queue member device
state should be maintained by device state events. Some users have seen
instances where busy agents were called when they shouldn't have, which is the
reason the call to ast_parse_device_state() was added. That change appears to
have resolved that issue but also causes this performance regression. There may
still be issues with queue member status, and if so, alternative methods should
be investigated to resolve them.
AST-695
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/10@341486 65c4cc65-6c06-0410-ace0-fbb531ad65f3
ASTERISK-12175 changed the p and X options to not interfere with the s
option when they are used together. It makes more sense for the s option
to have priority for the DTMF '*' key since it cannot change its
activation code. Otherwise, you could not use option s with the p or X
options.
JIRA AST-671
........
Merged revisions 340470 from http://svn.asterisk.org/svn/asterisk/branches/1.8
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/10@340471 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r340108 | mnicholson | 2011-10-10 09:14:48 -0500 (Mon, 10 Oct 2011) | 11 lines
Load the proper XML documentation when multiple modules document the same application.
This patch adds an optional "module" attribute to the XML documentation spec
that allows the documentation processor to match apps with identical names from
different modules to their documentation. This patch also fixes a number of
bugs with the documentation processor and should make it a little more
efficient. Support for multiple languages has also been properly implemented.
ASTERISK-18130
Review: https://reviewboard.asterisk.org/r/1485/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/10@340109 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r337973 | rmudgett | 2011-09-26 14:30:39 -0500 (Mon, 26 Sep 2011) | 30 lines
Fix deadlock when using dummy channels.
Dummy channels created by ast_dummy_channel_alloc() should be destoyed by
ast_channel_unref(). Using ast_channel_release() needlessly grabs the
channel container lock and can cause a deadlock as a result.
* Analyzed use of ast_dummy_channel_alloc() and made use
ast_channel_unref() when done with the dummy channel. (Primary reason for
the reported deadlock.)
* Made app_dial.c:dial_exec_full() not call ast_call() holding any channel
locks. Chan_local could not perform deadlock avoidance correctly.
(Potential deadlock exposed by this issue. Secondary reason for the
reported deadlock since the held lock was part of the deadlock chain.)
* Fixed some uses of ast_dummy_channel_alloc() not checking the returned
channel pointer for failure.
* Fixed some potential chan=NULL pointer usage in func_odbc.c. Protected
by testing the bogus_chan value.
* Fixed needlessly clearing a 1024 char auto array when setting the first
char to zero is enough in manager.c:action_getvar().
(closes issue ASTERISK-18613)
Reported by: Thomas Arimont
Patches:
jira_asterisk_18613_v1.8.patch (license #5621) patch uploaded by rmudgett
Tested by: Thomas Arimont
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/10@337974 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This commit is for trunk not version 10
-----
Adds a timeout argument to app_originate
the default is 30s this will be used if the timout supplied is invalid or
no timeout is supplied.
-----
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/10@337433 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r337118 | mjordan | 2011-09-20 17:38:54 -0500 (Tue, 20 Sep 2011) | 21 lines
Fix for incorrect voicemail duration in external notifications
This patch fixes an issue where the voicemail duration was being reported
with a duration significantly less than the actual sound file duration.
Voicemails that contained mostly silence were reporting the duration of
only the sound in the file, as opposed to the duration of the file with
the silence. This patch fixes this by having two durations reported in
the __ast_play_and_record family of functions - the sound_duration and the
actual duration of the file. The sound_duration, which is optional, now
reports the duration of the sound in the file, while the actual full duration
of the file is reported in the duration parameter. This allows the voicemail
applications to use the sound_duration for minimum duration checking, while
reporting the full duration to external parties if the voicemail is kept.
(issue ASTERISK-2234)
(closes issue ASTERISK-16981)
Reported by: Mary Ciuciu, Byron Clark, Brad House, Karsten Wemheuer, KevinH
Tested by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/1443
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/10@337120 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r336658 | rmudgett | 2011-09-19 13:46:40 -0500 (Mon, 19 Sep 2011) | 31 lines
Made Dial d and H options no longer immediately auto-answer the calling leg.
The Dial d and H options break DTMF attended transfer atxferdropcall
option.
1) Party A calls party B.
2) Party B does a DTMF attended transfer to Party C.
If the dialplan uses the Dial d or H options to call Party C then the Dial
application answers the call immediately before initiating the call leg to
Party C. The premature answer causes the transfer code to not invoke the
atxferdropcall=no behavior for a blonde transfer since Party C has
"answered". The transfer code thinks that Party B has "consulted" with
Party C when Party B hangs up and completes the transfer to Party A.
Party A now hears ringback until Party C actually answers.
ASTERISK-13294 Dial d option.
ASTERISK-11067 Dial H option to disconnect before answer.
The referenced issues made Dial answer with the d and H options because
many SIP and ISDN phones cannot send DTMF before the call is connected.
* Made require the dialplan to control when or if the call needs to be
answered to use the Dial application d and H options. (The call is no
longer surprise answered when using the Dial d or H options.)
Review: https://reviewboard.asterisk.org/r/1381/
JIRA AST-623
JIRA AST-666
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/10@336659 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r336093 | irroot | 2011-09-15 17:46:21 +0200 (Thu, 15 Sep 2011) | 20 lines
Locking order in app_queue.c causes deadlocks.
a channel lock must never be held with the queues container lock held.
the deadlock occured on masquerade.
the queues container lock is a relic of the past the old queue module lock.
with ao2 there is no need to hold this lock when dealing with members this
patch removes unneeded locks.
(closes issue ASTERISK-18101)
(closes issue ASTERISK-18487)
Reported by: Paul Rolfe, Jason Legault
Tested by: irroot, Jason Legault, Paul Rolfe
Reviewed by: Matthew Nicholson
Review: https://reviewboard.asterisk.org/r/1402/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/10@336094 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When using Meetme as a modular call bridge from third party applications, it's handy to make
it behave like a normal call bridge. When the second to last person exists, the last person
will be kicked out of the conference when this option is enabled.
(closes issue ASTERISK-18234)
Review: https://reviewboard.asterisk.org/r/1376/
Patch by oej, sponsored by ClearIT, Solna, Sweden
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/10@336042 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r335341 | kmoore | 2011-09-12 09:21:17 -0500 (Mon, 12 Sep 2011) | 10 lines
Ensure frames are not written to dialed channel if ringback is requested
When a single channel was dialed and there was media to be forwarded to the
calling channel, the media was written without regard for ringback causing
silence to be heard in some circumstances. This regression was introduced
when the meaning of "single" changed to mean only the number of channels
dialed.
(closes issue ASTERISK-18083)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/10@335346 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r335064 | mjordan | 2011-09-09 11:09:09 -0500 (Fri, 09 Sep 2011) | 23 lines
Updated SIP 484 handling; added Incomplete control frame
When a SIP phone uses the dial application and receives a 484 Address
Incomplete response, if overlapped dialing is enabled for SIP, then
the 484 Address Incomplete is forwarded back to the SIP phone and the
HANGUPCAUSE channel variable is set to 28. Previously, the Incomplete
application dialplan logic was automatically triggered; now, explicit
dialplan usage of the application is required.
Additionally, this patch adds a new AST_CONTOL_FRAME type called
AST_CONTROL_INCOMPLETE. If a channel driver receives this control frame,
it is an indication that the dialplan expects more digits back from the
device. If the device supports overlap dialing it should attempt to
notify the device that the dialplan is waiting for more digits; otherwise,
it can handle the frame in a manner appropriate to the channel driver.
(closes issue ASTERISK-17288)
Reported by: Mikael Carlsson
Tested by: Matthew Jordan
Review: https://reviewboard.asterisk.org/r/1416/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/10@335078 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r333339 | mjordan | 2011-08-26 08:36:36 -0500 (Fri, 26 Aug 2011) | 20 lines
Bug fixes for voicemail user emailsubject / emailbody.
This code change fixes a few issues with the voicemail user override of
emailbody and emailsubject, including escaping the strings, potential memory
leaks, and not overriding the voicemail defaults. Revision 325877 fixed this
for ASTERISK-16795, but did not fix it for ASTERISK-16781. A subsequent
check-in prevented 325877 from being applied to 10. This check-in resolves
both issues, and applies the changes to 1.8, 10, and trunk.
(closes issue ASTERISK-16781)
Reported by: Sebastien Couture
Tested by: mjordan
(closes issue ASTERISK-16795)
Reported by: mdeneen
Tested by: mjordan
Review: https://reviewboard.asterisk.org/r/1374
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/10@333370 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r333010 | rmudgett | 2011-08-23 13:14:01 -0500 (Tue, 23 Aug 2011) | 12 lines
Memory Leak in app_queue
The patch that was committed in the 1.6.x versions of Asterisk for
ASTERISK-15862 actually fixed two issues. One was not applicable to 1.8
but the other is. queue_leak.patch fixes the portion applicable to 1.8.
(closes issue ASTERISK-18265)
Reported by: Fred Schroeder
Patches:
queue_leak.patch (license #5049) patch uploaded by mmichelson
Tested by: Thomas Arimont
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/10@333011 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r332874 | rmudgett | 2011-08-22 14:32:19 -0500 (Mon, 22 Aug 2011) | 18 lines
Reference leaks in app_queue.
* Fixed load_realtime_queue() leaking a queue reference when it overwrites
q when processing a realtime queue.
(issue ASTERISK-18265)
* Make join_queue() unreference the queue returned by
load_realtime_queue() when it is done with the pointer. The
load_realtime_queue() returns a reference to the just loaded realtime
queue.
* Fixed queues container reference leak in queues_data_provider_get().
* queue_unref() should not return q that was just unreferenced.
* Made logic in __queues_show() and queues_data_provider_get() when
calling load_realtime_queue() easier to understand.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/10@332878 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r331774 | mnicholson | 2011-08-12 14:01:27 -0500 (Fri, 12 Aug 2011) | 11 lines
Unlock the channel before calling update_queue.
Holding the channel lock when calling update_queue which attempts to lock the
queue lock can cause a deadlock. This deadlock involves the following chain:
1. hold chan lock -> wait queue lock
2. hold queue lock -> wait agent list lock
3. hold agent list lock -> wait chan list lock
4. hold chan list lock -> wait chan lock
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/10@331775 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r331248 | rmudgett | 2011-08-09 17:12:59 -0500 (Tue, 09 Aug 2011) | 15 lines
Misc minor items found in code.
* Add some reentrancy protection in pbx.c when creating the contexts_table
hash table.
* Fix inverted test in chan_sip.c conditional code.
* Fix uninitialized variable and use of the wrong variable in chan_iax2.c.
* Fix test of return value in app_parkandannounce.c. Explicitly testing
for -1 is bad if the function does not actually return that value when it
fails.
* Fixup some comments and add some curly braces in features.c.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/10@331265 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r329529 | jrose | 2011-07-26 09:04:55 -0500 (Tue, 26 Jul 2011) | 5 lines
Changes sound file for prepend "then-press-pound" to "vm-then-pound" which is the same
prompt, only it turned out "then-press-pound" was part of extra sounds. Also, vm is more
appropriate anyway.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/10@329538 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r329527 | jrose | 2011-07-26 08:25:35 -0500 (Tue, 26 Jul 2011) | 17 lines
Fixes some voicemail forwarding behavior based around prepend mode.
Formerly, prepend forwarding would have the user record a message with no useful prompt
and an expectation for the user to push a button on the phone when finished recording.
If a length of silence was detected instead, the recording would be canceled and the user
would re-enter the voicemail forwarding menu. Subsequent time-outs in prepend recording
would also bug out in the sense that they would write over the original message and get
sent to the recipient regardless of whether they timed out or were accepted. This patch
fixes this issue and adds a prompt which will be played after a timeout informing the
user that they needed to press a button. Currently, the sound files that we have are
somewhat inadquate for this, so after the call we simply have Allison say "Please try
again. Then press pound." which actually relies on two separate sound files. Just one
would be more appropriate.
reporter: Vlad Povorozniuc
Review: https://reviewboard.asterisk.org/r/1327/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/10@329528 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r329199 | rmudgett | 2011-07-21 12:30:57 -0500 (Thu, 21 Jul 2011) | 17 lines
Update PickupChan documentation.
The PickupChan uses the ampersand as the argument separator.
Was documented as:
PickupChan(channel[,channel2[,...][,options]])
Fixed documentation to:
PickupChan(Technology/Resource[&Technology2/Resource2[&...]][,options])
This is a continuation of ASTERISK-17494 for v1.8 and later.
(closes issue ASTERISK-18144)
Reported by: Erik Smith
Patches:
pickupchan_ducumentation-v2.patch (License #6263) patch uploaded by Erik Smith
Tested by: Erik Smith
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/10@329200 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r328770 | kmoore | 2011-07-19 10:43:32 -0500 (Tue, 19 Jul 2011) | 11 lines
MeetMe requests a PIN twice in some circumstances
If a call to MeetMe includes both the dynamic(D) and always request PIN(P)
options, MeetMe will ask for the PIN two times: once for creating the
conference and once for entering the conference. This behavior was introduced
in rev 311616 when adding the CONFFLAG_ALWAYSPROMPT option to the logic branch
controlling PIN entry for joining a conference.
(closes AST-601)
Review: https://reviewboard.asterisk.org/r/1305/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.10@328771 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r328663 | markm | 2011-07-18 16:47:04 -0400 (Mon, 18 Jul 2011) | 9 lines
app_dial may double free a channel datastore
When starting a call with originate, and having the callee channel run Bridge() on pickup, we will double free the dialed_interface_info datastore, causing a crash. Make sure to check if the datastore still exists before trying to free it.
(closes issue ASTERISK-17917)
Reported by: Mark Murawski
Tested by: Mark Murawski
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.10@328664 65c4cc65-6c06-0410-ace0-fbb531ad65f3
MixMonitor has the ability to record in any file format Asterisk supports,
but the quality of wideband audio is not preserved. This is because
regardless of the sample rate the call is being recorded in, the audio
is always downsampled to 8khz and then upsampled to whatever wideband
format it is being written as. This patch resolves this by requesting
the audio from the audiohook in the signed linear format closest to the
sample rate of the format we are writing. This fix is only possible for
Asterisk 1.10 because audio hooks in 1.8 are not capable of wideband
audio.
Review: https://reviewboard.asterisk.org/r/1314/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.10@328120 65c4cc65-6c06-0410-ace0-fbb531ad65f3
