This change fixes a bug where if an SDP with media address and sendonly was
received twice the underlying call would go off hold, instead of remaining on hold.
This occured because the code did not properly take into account that the SDP
may contain both a valid media address and the sendonly attribute.
The code now examines the sendonly attribute and media address first, so if the
SDP is received again no change will occur.
ASTERISK-23558 #comment Reported by: John Bigelow
Review: https://reviewboard.asterisk.org/r/3472/
........
Merged revisions 413119 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@413120 65c4cc65-6c06-0410-ace0-fbb531ad65f3
For some odd reason, loading app_mixmonitor was fine, but res_monitor was not.
This patch fixes a set of issues related to func_periodic_hook exporting the
beep functions that gets res_monitor working again.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@412910 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This changes fixes a crash that occurs when stasis determines if it
should send a message out to an application or not. The code
incorrectly assumed that a bridge snapshot would always be present
when in reality for failure cases it may not be.
ASTERISK-23573 #close
........
Merged revisions 412882 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@412883 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This change fixes a problem where permanent contacts being qualified were not
being updated. This was caused by the permanent contacts getting a uuid and not a
known identifier, causing an inability to look them up when updating in the
qualify code. A bug also existed where the new configuration may not be available
immediately when updating qualifies.
(closes issue ASTERISK-23514)
Reported by: Richard Mudgett
Review: https://reviewboard.asterisk.org/r/3448/
........
Merged revisions 412551 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@412552 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Adds a tones URI type to the playback resource. The tone can be specified by
name (from indications.conf) or by a tone pattern. In addition, tonezone can
be specified in the URI (by appending ;tonezone=<zone>). Tones must be
stopped manually in order for a stasis control to move on from playback of
the tone. Tones may be paused, resumed, restarted, and stopped. They may
not be rewound or fast forwarded (tones can't be controlled in a way that
lets you skip around from note to note and pausing and resuming will also
restart the tone from the beginning). Tests are currently in development
for this feature (https://reviewboard.asterisk.org/r/3428/).
(closes issue ASTERISK-23433)
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/3427/
........
Merged revisions 412535 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@412536 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Add an option to enable a periodic beep to be played into a call if it
is being recorded. If enabled, it uses the PERIODIC_HOOK() function
internally to play the 'beep' prompt into the call at a specified
interval. This option is provided for both Monitor() and
MixMonitor().
Review: https://reviewboard.asterisk.org/r/3424/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@412427 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Remove unused RAII_VAR() declarations. The compiler cannot catch these
because the cleanup function "references" the unused variable. Some
actually allocated and released resources that were never used.
* Fixed some whitespace issues in stasis_bridges.c.
........
Merged revisions 412399 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@412400 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This app is pretty ancient, so it was never converted to use the
option parsing helper code. I'd like to add an option to this app
that takes an argument, and that's a pain to do when not using this
helper, so start by doing this conversion.
Review: https://reviewboard.asterisk.org/r/3429/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@412102 65c4cc65-6c06-0410-ace0-fbb531ad65f3
During discussions with Alexandr Dubovikov at Kamailio World, it became
apparent that while the SIP call ID is a useful identifier prior to an Asterisk
channel being created, it is far more preferable to use the channel name (or
some channel based identifier) when the channel is available. Homer is smart
enough to tie the various messages together. This patch opts to use the channel
name when it is available, falling back to the call ID otherwise.
........
Merged revisions 412088 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@412089 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This change makes it so if a transport is configured on an endpoint that is a WebSocket
type the option will be ignored. In practice this is fine because the WebSocket
transport can not create outgoing connections, it can only reuse existing ones. By
ignoring the option the existing PJSIP logic for using the existing connection will
be invoked and stuff will proceed.
(closes issue ASTERISK-23584)
Reported by: Rusty Newton
........
Merged revisions 411927 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@411928 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The change that fixed the pubsub test event's use of a dangling pointer
also changed when it was processed relative to the pjsip subscription
state change processing. This change corrects the order of events while
holding a reference to the pointer that was previously dangling.
........
Merged revisions 411883 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@411884 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The Stasis() dialplan application monitors what bridge a channel is in
and so necessarily holds on to a bridge pointer. This change ensures
that it also holds on to a reference for that bridge to prevent the
bridge pointer from becoming a dangling pointer.
........
Merged revisions 411804 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@411806 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Assert if a channel is destroyed but has the snapshot staging flag set.
In this case the final channel destruction snapshot would never get taken.
* Assert if what we just got out of the stasis cache is not what we were
looking for. This assert would have saved several days searching for a
bug and a lot of my hair.
* Assert if the music on hold message posts could not find the associated
channel. A crash will happen later when manager tries to send the MOH AMI
message. This assert catches the problem when the stasis message is
posted instead of by the thread processing the defective message.
* Always generate a backtrace when an ast_assert() fails.
Review: https://reviewboard.asterisk.org/r/3411/
........
Merged revisions 411701 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@411702 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Parts of res_hep properly checked for a valid configuration object before
attempting to access the configuration. A check, however, was missed when
a packet is sent. This patch fixes the crash caused by not checking if the
configuration object is valid.
........
Merged revisions 411668 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@411669 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This commit contains several changes to sorcery:
1) Application of sorcery configuration based on module name is automatically performed
when sorcery is opened for a module.
2) Sorcery will not attempt to apply the same wizard to an object type more than once.
3) Sorcery gives more exact results when attempting to apply a wizard, whether as the
default or based on configuration.
Sorcery unit tests still pass for me after making these changes.
Review: https://reviewboard.asterisk.org/r/3326
........
Merged revisions 411159 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@411656 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Use ast_bridge_channel_lock()/ast_bridge_channel_unlock() instead of
ao2_lock()/ao2_unlock() for struct ast_bridge_channel variables.
* Use ast_copy_string() instead of inlining it.
* Remove an already done TODO comment.
* Some whitespace tweaks.
........
Merged revisions 411638 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@411639 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch adds the following:
(1) A new module, res_hep, which implements a generic packet capture agent for
the Homer Encapsulation Protocol (HEP) version 3. Note that this code is based
on a patch provided by Alexandr Dubovikov; I basically just wrapped it up,
added configuration via the configuration framework, and threw in a
taskprocessor.
(2) A new module, res_hep_pjsip, which forwards all SIP message traffic that
passes through the res_pjsip stack over to res_hep for encapsulation and
transmission to a HEPv3 capture server.
Much thanks to Alexandr for his Asterisk patch for this code and for a *lot*
of patience waiting for me to port it to 12/trunk. Due to some dithering on
my part, this has taken the better part of a year to port forward (I still
blame CDRs for the delay).
ASTERISK-23557 #close
Review: https://reviewboard.asterisk.org/r/3207/
........
Merged revisions 411534 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@411556 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch fixes setting nullable integer columns to NULL instead of an empty
string, which fails for PostgreSQL, for example. The current code is supposed
to do so, but the check is broken. The patch also allows the first column in
the list to be a nullable integer.
Also, the check for existence of a mandatory column checked for the first
column in the list instead of the key field lookup column. This patch fixes
that issue as well.
Finally, the compatibility option allow_empty_string_in_nontext, which was
added to previous revisions to allow for some database backends with certain
schemas to function, has been removed.
Review: https://reviewboard.asterisk.org/r/3335
ASTERISK-23459 #close
ASTERISK-23351 #close
(closes issue ASTERISK-23459)
Reported by: zvision
patches:
res_config_odbc.diff uploaded by zvision (License 5755)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@411515 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Fixed bad use of ao2_find() in on_endpoint().
* Replaced use of find_endpoints() with find_an_endpoint() since only the
first found endpoint is ever needed.
* Fixed qualify_contact_cb() to update the contact with the aor
authenticate_qualify setting. Otherwise, permanent contacts in the aor
type sections would have a config line order dependancy.
* Fixed off nominal path contact ref leak in qualify_contact(). The
comment saying the unref is not needed was wrong.
* Fixed off nominal path use of the endpoint parameter if it is NULL in
send_out_of_dialog_request().
* Added missing off nominal path unref of pjsip tdata in
send_out_of_dialog_request().
* Fixed off nominal path failing to call the callback in send_request_cb()
when the request is challenged for authentication.
* Eliminated silly RAII_VAR() use in qualify_contact_cb().
* Updated ast_sip_send_request() doxygen to better reflect reality.
(closes issue ASTERISK-23254)
Reported by: rmudgett
Review: https://reviewboard.asterisk.org/r/3381/
........
Merged revisions 411141 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@411142 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Fix memory leak in ast_unreal_new_channels(). Made it generate the ;2
uniqueid on a stack variable instead of mallocing it.
* Made send error response to ARI and AMI requests instead of just logging
excessive uniqueid length and allowing truncation. action_originate() and
ari_channels_handle_originate_with_id().
* Fixed minor truncating uniqueid hole when generating the ;2 uniqueid
string length. Created public and internal lengths of uniqueid. The
internal length can handle a max public uniqueid plus an appended ;2.
* free() and ast_free() are NULL tolerant so they don't need a NULL test
before calling.
* Made use better struct initialization format instead of the position
dependent initialization format. Also anything not explicitly initialized
in the struct is initialized to zero by the compiler.
* Made ast_channel_internal_set_fake_ids() use the safer
ast_copy_string() instead of strncpy().
Review: https://reviewboard.asterisk.org/r/3371/
........
Merged revisions 410949 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@410950 65c4cc65-6c06-0410-ace0-fbb531ad65f3
"identify" is a special type of configuration object in PJSIP because
unlike the other objects, it is not provided by the base res_pjsip module.
Instead, it is provided by the res_pjsip_endpoint_identifier_ip module. If
using the default sorcery wizard (config,criteria=type=identify) then things
work because the module that applies the default wizard is the correct module.
However, if attempting to use sorcery.conf to apply an alternate wizard, it
was not possible. If you attempted to specify the identify object type in the
res_pjsip section, then the object could not be registered since the object
was undocumented for the res_pjsip module. There was no alternate configuration
section defined for it, so you were out of luck if you wanted to override the
default wizard.
With this change, the identify section will properly have a sorcery.conf-based
wizard applied when the identify definition is within the res_pjsip_endpoint_identifier_ip
section.
........
Merged revisions 410933 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@410934 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This change turns the bridge type field into a comma separated list of attributes.
These attributes include: mixing, holding, dtmf_events, and proxy_media. By setting
the various attributes a user can control the type of bridge created with the
behavior they need for their application.
(closes issue ASTERISK-23437)
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/3359/
........
Merged revisions 410904 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@410905 65c4cc65-6c06-0410-ace0-fbb531ad65f3
