mirror of
https://github.com/asterisk/asterisk.git
synced 2026-04-27 09:12:42 +00:00
14a985560e
Presence support has been added. This is accomplished by allowing for presence hints in addition to device state hints. A dialplan function called PRESENCE_STATE has been added to allow for setting and reading presence. Presence can be transmitted to Digium phones using custom XML elements in a PIDF presence document. Voicemail has new APIs that allow for moving, removing, forwarding, and playing messages. Messages have had a new unique message ID added to them so that the APIs will work reliably. The state of a voicemail mailbox can be obtained using an API that allows one to get a snapshot of the mailbox. A voicemail Dialplan App called VoiceMailPlayMsg has been added to be able to play back a specific message. Configuration hooks have been added. Configuration hooks allow for a piece of code to be executed when a specific configuration file is loaded by a specific module. This is useful for modules that are dependent on the configuration of other modules. chan_sip now has a public method that allows for a custom SIP INFO request to be sent mid-dialog. Digium phones use this in order to display progress bars when files are played. Messaging support has been expanded a bit. The main visible difference is the addition of an AMI action MessageSend. Finally, a ParkingLots manager action has been added in order to get a list of parking lots. git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@368435 65c4cc65-6c06-0410-ace0-fbb531ad65f3
148 lines
6.1 KiB
Plaintext
148 lines
6.1 KiB
Plaintext
;
|
|
; AMI - The Asterisk Manager Interface
|
|
;
|
|
; Third party application call management support and PBX event supervision
|
|
;
|
|
; This configuration file is read every time someone logs in
|
|
;
|
|
; Use the "manager show commands" at the CLI to list available manager commands
|
|
; and their authorization levels.
|
|
;
|
|
; "manager show command <command>" will show a help text.
|
|
;
|
|
; ---------------------------- SECURITY NOTE -------------------------------
|
|
; Note that you should not enable the AMI on a public IP address. If needed,
|
|
; block this TCP port with iptables (or another FW software) and reach it
|
|
; with IPsec, SSH, or SSL vpn tunnel. You can also make the manager
|
|
; interface available over http/https if Asterisk's http server is enabled in
|
|
; http.conf and if both "enabled" and "webenabled" are set to yes in
|
|
; this file. Both default to no. httptimeout provides the maximum
|
|
; timeout in seconds before a web based session is discarded. The
|
|
; default is 60 seconds.
|
|
;
|
|
[general]
|
|
enabled = no
|
|
;webenabled = yes
|
|
|
|
port = 5038
|
|
bindaddr = 0.0.0.0
|
|
|
|
; Parameters that control AMI over TLS. ("enabled" must be set too).
|
|
; You can open a connection to this socket with e.g.
|
|
;
|
|
; openssl s_client -connect my_host:5039
|
|
;
|
|
;tlsenable=no ; set to YES to enable it
|
|
;tlsbindaddr=0.0.0.0:5039 ; address and port to bind to, default to bindaddr and port 5039
|
|
;tlscertfile=/tmp/asterisk.pem ; path to the certificate.
|
|
;tlsprivatekey=/tmp/private.pem ; path to the private key, if no private given,
|
|
; if no tlsprivatekey is given, default is to search
|
|
; tlscertfile for private key.
|
|
;tlscipher=<cipher string> ; string specifying which SSL ciphers to use or not use
|
|
;
|
|
;allowmultiplelogin = yes ; IF set to no, rejects manager logins that are already in use.
|
|
; ; The default is yes.
|
|
;
|
|
;displayconnects = yes
|
|
;
|
|
; Add a Unix epoch timestamp to events (not action responses)
|
|
;
|
|
;timestampevents = yes
|
|
|
|
;brokeneventsaction = yes ; Restore previous behavior that caused the events
|
|
; action to not return a response in certain
|
|
; circumstances. Defaults to 'no'.
|
|
|
|
;
|
|
; Display certain channel variables every time a channel-oriented
|
|
; event is emitted:
|
|
;
|
|
;channelvars = var1,var2,var3
|
|
|
|
; debug = on ; enable some debugging info in AMI messages (default off).
|
|
; Also accessible through the "manager debug" CLI command.
|
|
|
|
; authtimeout specifies the maximum number of seconds a client has to
|
|
; authenticate. If the client does not authenticate beofre this timeout
|
|
; expires, the client will be disconnected. (default: 30 seconds)
|
|
|
|
;authtimeout = 30
|
|
|
|
; authlimit specifies the maximum number of unauthenticated sessions that will
|
|
; be allowed to connect at any given time.
|
|
|
|
;authlimit = 50
|
|
|
|
;httptimeout = 60
|
|
; a) httptimeout sets the Max-Age of the http cookie
|
|
; b) httptimeout is the amount of time the webserver waits
|
|
; on a action=waitevent request (actually its httptimeout-10)
|
|
; c) httptimeout is also the amount of time the webserver keeps
|
|
; a http session alive after completing a successful action
|
|
|
|
|
|
;[mark]
|
|
;secret = mysecret
|
|
;deny=0.0.0.0/0.0.0.0
|
|
;permit=209.16.236.73/255.255.255.0
|
|
;
|
|
;eventfilter=Event: Newchannel
|
|
;eventfilter=!Channel: DAHDI*
|
|
; The eventfilter option is used to whitelist or blacklist events per user to be
|
|
; reported with regular expressions and are allowed if both the regex matches
|
|
; and the user has read access set below. Filters are assumed to be for whitelisting
|
|
; unless preceeded by an exclamation point, which marks it as being black.
|
|
; Evaluation of the filters is as follows:
|
|
; - If no filters are configured all events are reported as normal.
|
|
; - If there are white filters only: implied black all filter processed first,
|
|
; then white filters.
|
|
; - If there are black filters only: implied white all filter processed first,
|
|
; then black filters.
|
|
; - If there are both white and black filters: implied black all filter processed
|
|
; first, then white filters, and lastly black filters.
|
|
|
|
;
|
|
; If the device connected via this user accepts input slowly,
|
|
; the timeout for writes to it can be increased to keep it
|
|
; from being disconnected (value is in milliseconds)
|
|
;
|
|
; writetimeout = 100
|
|
;
|
|
;displayconnects = yes ; Display on CLI user login/logoff
|
|
;
|
|
; Authorization for various classes
|
|
;
|
|
; Read authorization permits you to receive asynchronous events, in general.
|
|
; Write authorization permits you to send commands and get back responses. The
|
|
; following classes exist:
|
|
;
|
|
; all - All event classes below (including any we may have missed).
|
|
; system - General information about the system and ability to run system
|
|
; management commands, such as Shutdown, Restart, and Reload.
|
|
; call - Information about channels and ability to set information in a
|
|
; running channel.
|
|
; log - Logging information. Read-only. (Defined but not yet used.)
|
|
; verbose - Verbose information. Read-only. (Defined but not yet used.)
|
|
; agent - Information about queues and agents and ability to add queue
|
|
; members to a queue.
|
|
; user - Permission to send and receive UserEvent.
|
|
; config - Ability to read and write configuration files.
|
|
; command - Permission to run CLI commands. Write-only.
|
|
; dtmf - Receive DTMF events. Read-only.
|
|
; reporting - Ability to get information about the system.
|
|
; cdr - Output of cdr_manager, if loaded. Read-only.
|
|
; dialplan - Receive NewExten and VarSet events. Read-only.
|
|
; originate - Permission to originate new calls. Write-only.
|
|
; agi - Output AGI commands executed. Input AGI command to execute.
|
|
; cc - Call Completion events. Read-only.
|
|
; aoc - Permission to send Advice Of Charge messages and receive Advice
|
|
; - Of Charge events.
|
|
; test - Ability to read TestEvent notifications sent to the Asterisk Test
|
|
; Suite. Note that this is only enabled when the TEST_FRAMEWORK
|
|
; compiler flag is defined.
|
|
; message - Permissions to send out of call messages. Write-only
|
|
;
|
|
;read = system,call,log,verbose,agent,user,config,dtmf,reporting,cdr,dialplan
|
|
;write = system,call,agent,user,config,command,reporting,originate,message
|
|
|