Store the offset in the teletone buffer in the b-channel private data.
An NT-mode setup with ftmod_misdn showed severe (dial-)tone distortions
in a sound editor (330Hz sine wave phase errors), caused by
using a global teletone buffer offset.
Switching to a per-channel offset, that is advanced by the amount
of data actually written to the channel, removes (almost) all
distortions.
There is still a minimal phase error every ~500ms (audible) that
needs more investigating.
Signed-off-by: Stefan Knoblich <stkn@openisdn.net>
Remove the 'state' variable of per-channel data, use active flag exclusively to track
open/close state.
Add misdn_activate_channel()/misdn_deactivate_channel() helper functions, rename old
one to _misdn_toggle_channel() (internal).
Add _nowait variant of channel de-/activation function, that just sends the mISDN request message.
Signed-off-by: Stefan Knoblich <stkn@openisdn.net>
Store call CRV in caller_data.call_reference and use call private to hold the
FreeTDM channel object.
Remove isdn_data->channels_{local,remote,outbound}_crv arrays.
Allow (and force) inbound call state transition DIALTONE -> DOWN for
incoming RELEASE COMPLETE messages in NT mode.
Dialtone in NT mode works, everything else needs more testing.
Signed-off-by: Stefan Knoblich <stkn@openisdn.net>
ftmod_misdn currently returns len == 0 if the incoming message,
that triggered the read() call, does not contain any data.
Users of ftdm_channel_read() need to handle this case, or they
may possibly end up in an endless loop.
This patch reworks the ftdm_channel_read() handling in ftmod_isdn
and prevents it from entering an endless loop. The read error counter
is reset on first sucessful read w/ data.
Signed-off-by: Stefan Knoblich <stkn@openisdn.net>
cc1: warnings being treated as errors
./src/ftmod/ftmod_libpri/ftmod_libpri.c: In function 'msn_filter_foreach':
./src/ftmod/ftmod_libpri/ftmod_libpri.c:422: warning: dereferencing type-punned pointer will break strict-aliasing rules
make: *** [ftmod_libpri_la-ftmod_libpri.lo] Error 1
Signed-off-by: Stefan Knoblich <stkn@openisdn.net>
Two fixes:
Use ftdm_set_string() instead of sprintf() (seriously, wtf?).
Drop invalid, needless argument to ftdm_log().
Signed-off-by: Stefan Knoblich <stkn@openisdn.net>
The format string checks already caught a couple crash-worthy bugs and this
commit fixes a couple more.
Also includes __ftdm_check_scanf(), for completeness (currently unused).
Signed-off-by: Stefan Knoblich <stkn@openisdn.net>
Some I/O implementations (e.g. mISDN) need this information to correctly
set up the port configuration. In FreeTDM, the mode of a span has been.
up until now, a part of the signalling module configuration ("node" or "mode"
for libpri and isdn spans), which is parsed _after_ the I/O part of a span
has been initialized. This limitation currently prevents us from using mISDN
in NT mode.
To work around this problem (without adding a lot of new tunk_type values like "E1_NET" etc.),
add a new "trunk_mode" parameter to the span categories in freetdm.conf, which by default
is "CPE" for all trunk types, except "FXS" (which defaults to "NET").
ftmod_misdn uses trunk_type + trunk_mode to correctly choose the d-channel protocol
for a port.
ftmod_libpri uses trunk_mode as a hint for the default "mode" setting.
(NOTE: It will print a warning if trunk_mode and signalling mode do not match.)
All other modules currently ignore the value of trunk_mode.
Example freetdm.conf snippet for a mISDN span in NET/NT mode
(using a HFC-S USB dongle):
[span misdn MBRI_1]
trunk_type => BRI_PTMP
trunk_mode => NET
b-channel => HFC-S_USB.1:1-2
d-channel => HFC-S_USB.1:3
Signed-off-by: Stefan Knoblich <stkn@openisdn.net>
Indicator in IAM message.
- ss7_iam_nature_connection_hex is the channel variable to carry
HEX value from/to IAM message
- X-FreeTDM-IAM-NATURE-CONN-HEX is the x-header string to carry
HEX value from/to sip invite message
- This IE is 8 bit hex, which turns into 2 chars
- Only Satellite indicator, Continuity check indicator, and Echo
control device indicator are supported. Spare value are not taken.
Spare value is always set to all zero.
- example:
To set 00010101 (bit H-A), set X-FreeTDM-IAM-NATURE-CONN-HEX string
value to 15 in the sip invite message to NSG.
When NSG send out sip invite, if the incoming IAM message comes with
Nature of Connection IE, NSG will put X-FreeTDM-IAM-NATURE-CONN-HEX
in the invite x-header. For example, if the IE value is 00001010 in
the IAM, NSG will send X-FreeTDM-IAM-NATURE-CONN-HEX with value string
of "0A".
- Two characters are madatory. "0A" must be specified rather than "A". If
invalid format or characters are found, this x-header will be ommited.
- Valid characters include 0-9, A-F, and a-f
This feature allows ftmod_libpri to ignore calls with non-matching destination number.
You may want to use this on BRI PTMP lines (Point-to-MultiPoint),
to avoid conflicts between your FreeSWITCH server and other devices connected to the line.
The filter is disabled by default (all calls will be accepted),
setting one (or more) "local-number" parameters on the span configuration enables it.
Example configuration snippet:
<libpri_spans>
<span name="example01">
<!-- ... other span settings omitted ... -->
<param name="local-number" value="123456"/>
<param name="local-number" value="654321"/>
</span>
</libpri_spans>
Signed-off-by: Stefan Knoblich <stkn@openisdn.net>
Read the forward call indicator IE and print it into channel variable
ss7_iam_fwd_ind_hex. If this variable exists, put it in the x-header.
This implementation takes bits of A, CB, D, E, F, HG, I from the hex
value. Bits of KJ, L, P-M are not taken and set to 0.
The hex value is H-A-P-I, H is the highest bit to A, and next is P-I.
I is the lowest bit in the whole field, and H is the highest bit in
the whole field. Refer to Q.763 chapter 3.23.
