Resolves OPENZAP-189
Fixes:
src/ftmod/ftmod_isdn/ftmod_isdn.c: In function 'ftdm_isdn_931_34':
src/ftmod/ftmod_isdn/ftmod_isdn.c:902:21: error: variable 'status' set but not used [-Werror=unused-but-set-variable]
Signed-off-by: Stefan Knoblich <stkn@openisdn.net>
. added called party number INN variable
ie. <action application="export" data="freetdm_ss7_cld_inn=0"/>
. added multiple variables to set User Service Information IE
variables are :
ss7_iam_usi_trans_cap
ss7_iam_usi_code_standard
ss7_iam_usi_trans_mode
ss7_iam_usi_trans_rate_0
ss7_iam_usi_trans_rate_1
ss7_iam_usi_layer1_ident
ss7_iam_usi_layer1_prot
ss7_iam_usi_layer2_ident
ss7_iam_usi_layer2_prot
ss7_iam_usi_layer3_ident
ss7_iam_usi_layer3_prot
ss7_iam_usi_chan_struct
ss7_iam_usi_config
ss7_iam_usi_establish
ss7_iam_usi_symmetry
ss7_iam_usi_rate_multiplier
. ss7_iam_usi_trans_cap is a string variable, the others are all integers
. ss7_iam_usi_trans_cap has options of :
- SPEECH
- UNRESTRICTED
- RESTRICTED
- 31KHZ
- 7KHZ
- 15KHZ
- VIDEO
default value is SPEECH, if the parameter is wrong, set to SPEECH. If not
set, this field is not present
Fixes:
src/ftmod/ftmod_misdn/ftmod_misdn.c: In function 'misdn_handle_mph_information_ind':
src/ftmod/ftmod_misdn/ftmod_misdn.c:871:3: error: format '%lx' expects argument of type 'long unsigned int', but argument 13 has type 'uint64_t' [-Werror=format]
Signed-off-by: Stefan Knoblich <stkn@openisdn.net>
Do a "soft" wraparound with modulo, removes the ~0.5s tone glitch.
(Multiply ts.rate (samples) by two to match the offset unit (bytes, 2 per sample).)
Signed-off-by: Stefan Knoblich <stkn@openisdn.net>
Store the offset in the teletone buffer in the b-channel private data.
An NT-mode setup with ftmod_misdn showed severe (dial-)tone distortions
in a sound editor (330Hz sine wave phase errors), caused by
using a global teletone buffer offset.
Switching to a per-channel offset, that is advanced by the amount
of data actually written to the channel, removes (almost) all
distortions.
There is still a minimal phase error every ~500ms (audible) that
needs more investigating.
Signed-off-by: Stefan Knoblich <stkn@openisdn.net>
Might as well import these too...
ftdm_offset_of() - Get offset of member in structure.
ftdm_container_of() - Get pointer to enclosing structure from pointer to structure member.
Signed-off-by: Stefan Knoblich <stkn@openisdn.net>
ftdm_min(x,y) - Returns the smaller of the two values x and y.
ftdm_max(x,y) - Returns the larger of the two values x and y.
ftdm_clamp(val, min, max) - Returns value that is in the range [vmin,vmax].
Signed-off-by: Stefan Knoblich <stkn@openisdn.net>
Remove the 'state' variable of per-channel data, use active flag exclusively to track
open/close state.
Add misdn_activate_channel()/misdn_deactivate_channel() helper functions, rename old
one to _misdn_toggle_channel() (internal).
Add _nowait variant of channel de-/activation function, that just sends the mISDN request message.
Signed-off-by: Stefan Knoblich <stkn@openisdn.net>
Store call CRV in caller_data.call_reference and use call private to hold the
FreeTDM channel object.
Remove isdn_data->channels_{local,remote,outbound}_crv arrays.
Allow (and force) inbound call state transition DIALTONE -> DOWN for
incoming RELEASE COMPLETE messages in NT mode.
Dialtone in NT mode works, everything else needs more testing.
Signed-off-by: Stefan Knoblich <stkn@openisdn.net>
ftmod_misdn currently returns len == 0 if the incoming message,
that triggered the read() call, does not contain any data.
Users of ftdm_channel_read() need to handle this case, or they
may possibly end up in an endless loop.
This patch reworks the ftdm_channel_read() handling in ftmod_isdn
and prevents it from entering an endless loop. The read error counter
is reset on first sucessful read w/ data.
Signed-off-by: Stefan Knoblich <stkn@openisdn.net>
cc1: warnings being treated as errors
./src/ftmod/ftmod_libpri/ftmod_libpri.c: In function 'msn_filter_foreach':
./src/ftmod/ftmod_libpri/ftmod_libpri.c:422: warning: dereferencing type-punned pointer will break strict-aliasing rules
make: *** [ftmod_libpri_la-ftmod_libpri.lo] Error 1
Signed-off-by: Stefan Knoblich <stkn@openisdn.net>
Fixes:
cp ESL.so /var/tmp/por.../image/usr/lib64/php5.3/lib/extensions/no-debug-zts-20090626
cp: cannot create regular file `/var/tmp/por.../image/usr/lib64/php5.3/lib/extensions/no-debug-zts-20090626': No such file or directory
Signed-off-by: Stefan Knoblich <stkn@openisdn.net>
Two fixes:
Use ftdm_set_string() instead of sprintf() (seriously, wtf?).
Drop invalid, needless argument to ftdm_log().
Signed-off-by: Stefan Knoblich <stkn@openisdn.net>
Neither of them accepts extra arguments and ftmod_sangoma_isdn is calling
ftmod_assert() with a char * msg argument.
Signed-off-by: Stefan Knoblich <stkn@openisdn.net>
The format string checks already caught a couple crash-worthy bugs and this
commit fixes a couple more.
Also includes __ftdm_check_scanf(), for completeness (currently unused).
Signed-off-by: Stefan Knoblich <stkn@openisdn.net>
Output the current trunk_type in "add X-channel vs. trunk_type" error messages and
check this for B-/D-channels too.
ISDN (= digital) spans need to have a trunk_type set before adding channels,
bail out early with an error message (actually two) if this is not the case.
(Adding channels should really be moved out of the parsing loop, to catch
certain types of errors easier.)
Signed-off-by: Stefan Knoblich <stkn@openisdn.net>
Some I/O implementations (e.g. mISDN) need this information to correctly
set up the port configuration. In FreeTDM, the mode of a span has been.
up until now, a part of the signalling module configuration ("node" or "mode"
for libpri and isdn spans), which is parsed _after_ the I/O part of a span
has been initialized. This limitation currently prevents us from using mISDN
in NT mode.
To work around this problem (without adding a lot of new tunk_type values like "E1_NET" etc.),
add a new "trunk_mode" parameter to the span categories in freetdm.conf, which by default
is "CPE" for all trunk types, except "FXS" (which defaults to "NET").
ftmod_misdn uses trunk_type + trunk_mode to correctly choose the d-channel protocol
for a port.
ftmod_libpri uses trunk_mode as a hint for the default "mode" setting.
(NOTE: It will print a warning if trunk_mode and signalling mode do not match.)
All other modules currently ignore the value of trunk_mode.
Example freetdm.conf snippet for a mISDN span in NET/NT mode
(using a HFC-S USB dongle):
[span misdn MBRI_1]
trunk_type => BRI_PTMP
trunk_mode => NET
b-channel => HFC-S_USB.1:1-2
d-channel => HFC-S_USB.1:3
Signed-off-by: Stefan Knoblich <stkn@openisdn.net>
Portability fix for uClibc and other (linux) environments that lack execinfo.h.
ftdm_backtrace_walk() and related return FTDM_NOTIMPL and print a message
if backtraces are not available in the current environment.
Signed-off-by: Stefan Knoblich <stkn@openisdn.net>
Indicator in IAM message.
- ss7_iam_nature_connection_hex is the channel variable to carry
HEX value from/to IAM message
- X-FreeTDM-IAM-NATURE-CONN-HEX is the x-header string to carry
HEX value from/to sip invite message
- This IE is 8 bit hex, which turns into 2 chars
- Only Satellite indicator, Continuity check indicator, and Echo
control device indicator are supported. Spare value are not taken.
Spare value is always set to all zero.
- example:
To set 00010101 (bit H-A), set X-FreeTDM-IAM-NATURE-CONN-HEX string
value to 15 in the sip invite message to NSG.
When NSG send out sip invite, if the incoming IAM message comes with
Nature of Connection IE, NSG will put X-FreeTDM-IAM-NATURE-CONN-HEX
in the invite x-header. For example, if the IE value is 00001010 in
the IAM, NSG will send X-FreeTDM-IAM-NATURE-CONN-HEX with value string
of "0A".
- Two characters are madatory. "0A" must be specified rather than "A". If
invalid format or characters are found, this x-header will be ommited.
- Valid characters include 0-9, A-F, and a-f
This feature allows ftmod_libpri to ignore calls with non-matching destination number.
You may want to use this on BRI PTMP lines (Point-to-MultiPoint),
to avoid conflicts between your FreeSWITCH server and other devices connected to the line.
The filter is disabled by default (all calls will be accepted),
setting one (or more) "local-number" parameters on the span configuration enables it.
Example configuration snippet:
<libpri_spans>
<span name="example01">
<!-- ... other span settings omitted ... -->
<param name="local-number" value="123456"/>
<param name="local-number" value="654321"/>
</span>
</libpri_spans>
Signed-off-by: Stefan Knoblich <stkn@openisdn.net>
readfile returns a value of type ssize_t (signed) and returns -1 if an
error occurs. In auth_readdb_internal, however, we were assigning the
return value of readfile to a variable of type size_t (unsigned), but
then testing this unsigned value to see if it was < 0, a
contradiction. We would thus simultaneously fail to report the error
in readfile and would end up with a corrupted length value.
sres_cached_answers_sockaddr is supposed to return ENOENT if no cached
records are found. Because of the missing return statement, however,
it would never do this and would instead return something very likely
to be garbage.
base64_d returns a value of size_t, which is unsigned. The value
therefore cannot be less than zero. The second check testing whether
it is >= INT_MAX is not a contradiction, but it doesn't make any sense
to check for this (as far as I can tell).
Converting these macros to functions declared static inline allow the
C type-checker to work and avoid warnings about unused expression
values. These warnings break the build with clang.
This avoid warnings about expressions with unused values. These
warnings break the build with clang.
An optimizing compiler should still inline these calls. If that turns
out not to happen on some platform, we could rename the functions used
internally and declare them static inline.
The implementation clears the context / state data from memory when it
is finished with it. Prior to this commit, however, it was actually
only clearing the first 4 bytes on x86 or 8 bytes on x86_64.
clang warns:
warning: argument to 'sizeof' in 'memset' call is the same
expression as the destination; did you mean to dereference it?
[-Wsizeof-pointer-memaccess]
Read the forward call indicator IE and print it into channel variable
ss7_iam_fwd_ind_hex. If this variable exists, put it in the x-header.
This implementation takes bits of A, CB, D, E, F, HG, I from the hex
value. Bits of KJ, L, P-M are not taken and set to 0.
The hex value is H-A-P-I, H is the highest bit to A, and next is P-I.
I is the lowest bit in the whole field, and H is the highest bit in
the whole field. Refer to Q.763 chapter 3.23.
In a sofia profile, you can now set the parameter tls-timeout to a
positive integer value which represents the maximum time in seconds
that OpenSSL will keep a TLS session (and its ephemeral keys) alive.
This value is passed to OpenSSL's SSL_CTX_set_timeout(3).
OpenSSL's default value is 300 seconds, but the relevant standard
(RFC 2246) suggests that much longer session lifetimes are
acceptable (it recommends values less than 24 hours).
Longer values can be useful for extending battery life on mobile
devices.
Signed-off-by: Travis Cross <tc@traviscross.com>
* fixed bug with remote hello-hash buffer being too small
* removed unused hello-hash storage in zrtp stream context
* fixed bug with libzrtp rendered "empty" SAS hash from incoming
SasRelay packet
* incremented libzrtp version number to 1.15
Signed-off-by: Travis Cross <tc@traviscross.com>
Michael Jerris
Moises Silva
Steve Underwood
SwK
Stefan Knoblich
Kapil
Jeff Lenk
root
David Yat Sin
James Zhang
Mathieu Rene
Travis Cross
Anthony Minessale
Michael S Collins
Steve Underwood
Viktor Krykun