30 lines
1.6 KiB
Markdown
30 lines
1.6 KiB
Markdown
|
|
# ratgdo for ESPHome
|
|
|
|
This is a port of the ratgdo software for the v2.0/v2.5 board to ESPHome.
|
|
|
|
[Visit the github.io page to purchase boards](https://paulwieland.github.io/ratgdo/#order)
|
|
|
|
## Installation
|
|
|
|
- Flash the ESPHome based firmware using the [Web Installer](https://ratgdo.github.io/esphome-ratgdo/)
|
|
|
|
It is no longer necessary to save the rolling code counter when switching between firmware.
|
|
|
|
## First use after adding to Home Assistant
|
|
|
|
The ESPHome firmware will allow you to open the door to any position after calibration. To calibrate the door, open and close it once without stopping.
|
|
|
|
<img width="560" alt="position_demo" src="https://github.com/RATGDO/esphome-ratgdo/assets/663432/22a9873e-67bb-4b2f-bb32-70047cfe666d">
|
|
|
|
## ESPHome config
|
|
|
|
- [ESPHome config for v2.0 board with ESP8266 D1 Mini lite](https://github.com/RATGDO/esphome-ratgdo/blob/main/static/v2board_esp8266_d1_mini_lite.yaml)
|
|
- [ESPHome config for v2.0 board with ESP32 D1 Mini](https://github.com/RATGDO/esphome-ratgdo/blob/main/static/v2board_esp32_d1_mini.yaml)
|
|
- [ESPHome config for v2.0 board with ESP32 Lolin D2 Mini](https://github.com/RATGDO/esphome-ratgdo/blob/main/static/v2board_esp32_lolin_s2_mini.yaml)
|
|
- [ESPHome config for v2.5 board with ESP8266 D1 Mini lite](https://github.com/RATGDO/esphome-ratgdo/blob/main/static/v25board_esp8266_d1_mini_lite.yaml)
|
|
- [ESPHome config for v2.5 board with ESP32 D1 Mini](https://github.com/RATGDO/esphome-ratgdo/blob/main/static/v25board_esp32_d1_mini.yaml)
|
|
- [Web Installer](https://ratgdo.github.io/esphome-ratgdo/)
|
|
|
|
|